RM35X0E _58 Vehicle Interior _078601 SEAT _0400052 OCCUPANT DETECTION SENSOR(for 60/40 Split Seat Type 60 Side) A

SEAT  OCCUPANT DETECTION SENSOR(for 60/40 Split Seat Type 60 Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 79335B 1.INSTALL NO. 3 SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR)

HINT:

When installing a No. 3 seat cushion cover sub-assembly RH, refer to the Precaution section in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>PRECAUTION


a.
B547523C01
1.865,3.771 2.167,3.219 false 2.198,3.073 2.51,3.229 0.313,0.156 10 false *a 1.01,1.031 1.229,1.229 0.219,0.198 10 true (1) 1.375,1.031 1.594,1.229 0.219,0.198 10 true (2) 1.906,0.646 2.125,0.844 0.219,0.198 10 true (6) 1.927,1.125 2.146,1.323 0.219,0.198 10 true (7) 1.969,1.583 2.188,1.781 0.219,0.198 10 true (8) 0.479,1.573 0.698,1.771 0.219,0.198 10 true (5) 0.49,1.135 0.708,1.333 0.219,0.198 10 true (4) 0.5,0.615 0.719,0.813 0.219,0.198 10 true (3)
*a Hog Ring Pliers


Using hog ring pliers, install the new 8 hog rings in the order indicated in the illustration.


b.
B552176
1.76,2.938 2,2.521 false 1.927,2.354 2.24,2.552 0.313,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install the No. 3 seat cushion cover sub-assembly RH to the No. 3 seat cushion pad RH (occupant detection sensor) with the new hog ring.

NOTICE:
·

Be careful not to damage the No. 3 seat cushion cover sub-assembly RH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 3 seat cushion cover sub-assembly RH.