SEAT OCCUPANT DETECTION SENSOR(for 60/40 Split Seat Type 40 Side) REMOVAL
CAUTION / NOTICE / HINT
- CAUTION:
- ·
Wear protective gloves. Sharp areas on the parts may injure your hands.
·There is risk of injury.
- HINT:
- ·
Use the same procedure for RHD and LHD vehicles.
·The procedure listed below is for LHD vehicles.
PROCEDURE
1.REMOVE NO. 3 SEAT ASSEMBLY LH
73316B
2.REMOVE REAR NO. 3 SEAT INNER BELT COVER LH
72345X
3.REMOVE NO. 4 SEAT STAND FRAME CAP LH
72057G
4.REMOVE REAR NO. 1 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
72526M
5.REMOVE NO. 3 SEAT RECLINING ADJUSTER RELEASE HANDLE LH
72216D
6.REMOVE NO. 3 SEAT TRACK HANDLE CONTROL LEVER LH
79076S
7.REMOVE NO. 3 SEAT LEG COVER SUB-ASSEMBLY LH
79076R
8.REMOVE NO. 3 SEAT NO. 2 INNER LEG COVER SUB-ASSEMBLY
73390A
9.REMOVE REAR SEAT INNER BELT ASSEMBLY
79076Q
10.REMOVE NO. 3 SEAT NO. 1 INNER LEG COVER SUB-ASSEMBLY
71H76K
11.REMOVE REAR NO. 3 SEAT RECLINING ADJUSTER INSIDE COVER LH
12.REMOVE REAR SEAT CUSHION ASSEMBLY
72345U
13.REMOVE NO. 3 SEAT STAND FRAME CAP RH
72057F
14.REMOVE REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH
15.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
79345B
16.REMOVE NO. 3 SEAT CUSHION PAD LH (OCCUPANT DETECTION SENSOR)
Remove the 8 hog rings and cover sub-assembly LH from the No. 3 seat cushion pad LH (occupant detection sensor).
- NOTICE:
-
Be careful not to damage the cover sub-assembly LH.