SEAT BELT REAR SEAT INNER BELT ASSEMBLY(for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt without Headrest) REMOVAL
CAUTION / NOTICE / HINT
- CAUTION:
- ·
Wear protective gloves. Sharp areas on the parts may injure your hands.
·There is risk of injury.
- HINT:
- ·
Use the same procedure for RHD and LHD vehicles.
·The procedure listed below is for LHD vehicles.
·The procedure listed below is a representative example.
·Use the same procedure for all rows, unless otherwise specified.
PROCEDURE
1.REMOVE REAR SEAT ASSEMBLY LH
71833Q
2.REMOVE LH SEAT REAR NO. 3 SEAT RECLINING COVER RH
73380R
3.REMOVE REAR SEAT 3 PERSONS BELT ASSEMBLY
Remove the bolt and rear seat 3 persons belt assembly.
79J67E
4.REMOVE REAR NO. 3 SEAT NO. 3 LEG SIDE COVER
79J67C
5.REMOVE REAR NO. 3 SEAT NO. 1 LEG SIDE COVER
79J67D
6.REMOVE REAR NO. 3 SEAT NO. 2 LEG SIDE COVER
71834Q
7.REMOVE LH SEAT REAR NO. 3 SEAT RECLINING COVER LH
73330J
8.REMOVE REAR SEAT 3 PERSONS LAP TYPE BELT ASSEMBLY
9.REMOVE SEAT CUSHION COVER WITH PAD
73460E
10.REMOVE REAR CENTER SEAT 3 PERSONS BELT ASSEMBLY LH
Loosen the bolt and remove the rear center seat 3 persons belt assembly LH.
73460D
11.REMOVE REAR CENTER SEAT 3 PERSONS BELT ASSEMBLY RH
- HINT:
-
Use the same procedure described for the rear center seat 3 persons belt assembly LH.