CHECK CUSTOMIZE PARAMETERS
The operation check below is based on the non-customized initial condition of the vehicle.
CHECK BASIC FUNCTION
The switches described in this text are the switches for transmitting signals. The switches are built into the electrical key transmitter sub-assembly.
All the functions listed below must be checked in comparison with the wireless door lock control operation area.
Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.
If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak transmitter battery.
If the switch is held, the transmitter LED illuminates repeatedly.
Check that all doors lock when the lock switch is pressed.
Check that all doors unlock when the unlock switch is pressed.
CHECK CHATTERING PREVENTION FUNCTION
Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, and check that the corresponding operation is carried out.
CHECK SWITCH OPERATION FAIL-SAFE FUNCTION
Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.
CHECK ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION
When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all doors.
When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.
CHECK ANSWER-BACK (WIRELESS DOOR LOCK BUZZER) FUNCTION (w/ Wireless Door Lock Buzzer Answer-back Function)
When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all doors.
When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of all doors.
CHECK AUTOMATIC LOCKING FUNCTION
Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 30 seconds of all doors being unlocked by pressing the unlock switch.
Check that the automatic locking function does not operate when any door has been opened within approximately 30 seconds of unlocking the doors by pressing the unlock switch.
Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 30 seconds of unlocking the doors by pressing the unlock switch.
CHECK DOOR AJAR WARNING FUNCTION
When wireless lock with doors open function is set to "ON", this function is canceled even if set to "ON".
Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.
CHECK DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR
With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.
The doors can be unlocked even when a door is open or ajar.
CHECK THE WIRELESS RESERVATION POWER SLIDE DOOR LOCK FUNCTION (w/ Power Slide Door System)
Check that the lock operation is performed if the lock switch is pressed during the closing operation of the power slide door when all other doors are closed.
When the lock operation is completed, the hazard warning lights flash once and the wireless door lock buzzer sounds once*.
*: w/ Wireless Door Lock Buzzer Answer-back Function
CHECK ONE-MOTION OPERATION (w/ Power Slide Door System)
When the electrical key transmitter sub-assembly (slide door open/close switch RH) is operated with all the doors locked, check that the doors of the operated side unlock and a slide door RH open operation is performed.
Before checking the one-motion operation, check that the power slide door system customization settings "Wireless PSD SW Operation(RR)" are set to "2/OM" or "L/OM".
When the electrical key transmitter sub-assembly (slide door open/close switch LH) is operated with all the doors locked, check that the doors of the operated side unlock and a slide door LH open operation is performed.
Before checking the one-motion operation, check that the power slide door system customization settings "Wireless PSD SW Operation(RL)" are set to "2/OM" or "L/OM".
CHECK THE ILLUMINATED ENTRY FUNCTION