DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Ignition switch ACC signal | OFF or ON | ON: Ignition switch ACC
OFF: Ignition switch off |
"ON" is also displayed for this item when the ignition switch is ON. |
| IG SW | Ignition switch ON signal | OFF or ON | ON: Ignition switch ON
OFF: Ignition switch off |
"OFF" is also displayed for this item when the ignition switch is ACC. |
| RR Door Courtesy SW | Rear door courtesy light switch assembly RH signal | OFF or ON | OFF: Slide door RH closed
ON: Slide door RH open |
w/ Slide Door RH |
| RL Door Courtesy SW | Rear door courtesy light switch assembly LH signal | OFF or ON | OFF: Slide door LH closed
ON: Slide door LH open |
w/ Slide Door LH |
| Back Door Courtesy SW | Back door courtesy light switch signal | OFF or ON | OFF: Back door closed
ON: Back door open |
- |
| Back Door Lock Pos SW | Back door unlock detection switch signal | OFF or ON | OFF: Back door unlocked
ON: Back door locked |
- |
| FR Door Lock Pos | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked
UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch assembly RH signal | OFF or ON | OFF: Front door RH closed
ON: Front door RH open |
- |
| FL Door Lock Pos | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked
UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch assembly LH signal | OFF or ON | OFF: Front door LH closed
ON: Front door LH open |
- |
| Ceiling Light SW | Room light switch signal | OFF or ON | OFF: Room light switch off
ON: Room light switch on |
w/ Ignition Linked Automatic Unlock Function |
| RR-Door Lock Pos SW | Slide door RH unlock detection switch signal | OFF or ON | OFF: Slide door RH unlocked
ON: Slide door RH locked |
w/ Slide Door RH |
| RL-Door Lock Pos SW | Slide door LH unlock detection switch signal | OFF or ON | OFF: Slide door LH unlocked
ON: Slide door LH locked |
w/ Slide Door LH |
| Interior Light Control | Operation of the illuminated entry system | OFF or ON | Customized setting displayed | Displayed only when All Data is selected. |
| I/L ON W/Door Key Unlock | Function that lights up the interior lights when the doors are unlocked | OFF or ON | Customized setting displayed | Displayed only when All Data is selected. |
| Lighting Time | Lighting time of the delay control function (illuminated entry system) | 15s, 7.5s or 30s | Customized setting displayed | Displayed only when All Data is selected. |
| Room Light when Aprchd | Function that lights up the interior lights when a key enters any actuation area | OFF or ON | Customized setting displayed | ·
Displayed only when All Data is selected. ·
w/ Entry and Start System |
| I/L when ACC OFF | Function that lights up the interior lights when the ignition switch is turned from ACC or ON to off | OFF or ON | Customized setting displayed | Displayed only when All Data is selected. |
| Reading Light Switch 1 | Spot light assembly (spot light switch) (for Front RH) condition | OFF or ON | OFF: Spot light assembly (spot light switch) (for Front RH) off
ON: Spot light assembly (spot light switch) (for Front RH) on |
for Wagon |
| Reading Light Switch 2 | Spot light assembly (spot light switch) (for Front LH) condition | OFF or ON | OFF: Spot light assembly (spot light switch) (for Front LH) off
ON: Spot light assembly (spot light switch) (for Front LH) on |
for Wagon |
| Reading Light Switch 3 | Spot light assembly (spot light switch) (for Rear RH) condition | OFF or ON | OFF: Spot light assembly (spot light switch) (for Rear RH) off
ON: Spot light assembly (spot light switch) (for Rear RH) on |
for Wagon |
| Reading Light Switch 4 | Spot light assembly (spot light switch) (for Rear LH) condition | OFF or ON | OFF: Spot light assembly (spot light switch) (for Rear LH) off
ON: Spot light assembly (spot light switch) (for Rear LH) on |
for Wagon |
| Door Trim Illumination Switch (Front) | Room light switch signal | OFF or ON | OFF: Room light switch off
ON: Room light switch on |
for Wagon |
| Door Trim Illumination Color Switch (Front) | No. 2 room light switch signal | OFF or ON | OFF: No. 2 room light switch off
ON: No. 2 room light switch on |
w/ Color Change Function |
| Door Trim Illumination Switch (Rear) | Integration control and panel assembly (room light switch) condition | OFF or ON | OFF: Integration control and panel assembly (room light switch) off
ON: Integration control and panel assembly (room light switch) on |
for Wagon |
| Door Trim Illumination Color Switch (Rear) | Integration control and panel assembly (No. 2 room light switch) condition | OFF or ON | OFF: Integration control and panel assembly (No. 2 room light switch) off
ON: Integration control and panel assembly (No. 2 room light switch) on |
w/ Color Change Function |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Star*t / Active Test.
*: for Wagon
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system* | OFF or ON | Perform the Active Test with the DOOR switch on. |
| Step Light | No. 2 room light assembly (for Bulb Type) or No. 1 interior illumination light assembly (for LED Type) | OFF or ON | w/ Step light, Ignition Linked Automatic Door Unlock Function |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | DOME CUT relay | When performing this Active Test, turn all the interior lights on.
·
OFF: DOME CUT relay on (interior lights turn on) ·
ON: DOME CUT relay off (interior lights turn off) |
| Interior Illumination Light1 | The following lights Illuminated:
·
No. 1 interior illumination light assembly (Slide Door Illumination) ·
No. 2 interior illumination light assembly (Slide Door Illumination) ·
No. 1 interior illumination light assembly (Quarter Trim Illumination) ·
No. 2 interior illumination light assembly (Quarter Trim Illumination) |
OFF or ON | for Wagon without Color Change Function |
| Dimmer Signal | Outputs night mode (dimmer signal) | OFF or ON | - |
| Illumination Module A1 | Spot light assembly (spot light switch) (for Front RH) | OFF or ON | for Wagon |
| Illumination Module A2 | Spot light assembly (spot light switch) (for Rear RH) | OFF or ON | for Wagon |
| Illumination Module A3 | Spot light assembly (spot light switch) (for Front LH) | OFF or ON | for Wagon |
| Illumination Module A4 | Spot light assembly (spot light switch) (for Rear LH) | OFF or ON | for Wagon |
| Illumination Module B1 | The following lights Illuminated (blue):
·
No. 1 interior illumination light assembly (Slide Door Illumination) ·
No. 2 interior illumination light assembly (Slide Door Illumination) ·
No. 1 interior illumination light assembly (Quarter Trim Illumination) ·
No. 2 interior illumination light assembly (Quarter Trim Illumination) |
OFF or ON | w/ Color Change Function |
| Illumination Module B2 | The following lights Illuminated (white):
·
No. 1 interior illumination light assembly (Slide Door Illumination) ·
No. 2 interior illumination light assembly (Slide Door Illumination) ·
No. 1 interior illumination light assembly (Quarter Trim Illumination) ·
No. 2 interior illumination light assembly (Quarter Trim Illumination) |
OFF or ON | w/ Color Change Function |
| Illumination Module B3 | The following lights Illuminated (amber):
·
No. 1 interior illumination light assembly (Slide Door Illumination) ·
No. 2 interior illumination light assembly (Slide Door Illumination) ·
No. 1 interior illumination light assembly (Quarter Trim Illumination) ·
No. 2 interior illumination light assembly (Quarter Trim Illumination) |
OFF or ON | w/ Color Change Function |
| Illumination Module B4 | Not applicable | OFF or ON | Not applicable |
*: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Power/Engine SW Light | Push start switch illumination | OFF or ON | for Wagon |