RM35X0E _58 Vehicle Interior _079316 HEATING / AIR CONDITIONING _0386651 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  Recirculated/Fresh Air Modes do not Switch  


DESCRIPTION

If the fresh/recirculation mode does not change or exhaust gas can be smelled even while set to recirculation mode, the following causes are possible.

Malfunction Status Factor
·

Fresh/recirculation mode does not change.

·

Fresh/recirculation mode does not change automatically.

·

Exhaust gas can be smelled even while set to recirculation mode.


·

Blower servo motor malfunction

·

Blower damper and link operation (jamming)

·

Foreign object jammed in door

·

Air conditioning radiator sub-assembly malfunction

·

High engine coolant temperature



PROCEDURE

1.CHECK NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
a.

Check that the No. 1 blower damper servo sub-assembly is installed correctly.

OK:

No. 1 blower damper servo sub-assembly is installed correctly.



Result:
Proceed to
OK
NG



OK

2.CHECK FOR DTC

NG

REINSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

Click hereVehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>REASSEMBLY


2.CHECK FOR DTC
a.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B1442 is not output



Result:
Result Proceed to
OK (except 1GD-FTV (w/ Exhaust Gas Temperature Sensor for EGR)) A
OK (for 1GD-FTV (w/ Exhaust Gas Temperature Sensor for EGR)) B
NG C



A

3.READ VALUE USING GTS (COOLANT TEMPERATURE)

B

4.READ VALUE USING GTS (COOLANT TEMPERATURE)

C

GO TO DTC B1442

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>B1442


3.READ VALUE USING GTS (COOLANT TEMPERATURE)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Data List.


e.

Read the Data List according to the display on the GTS.

Powertrain > Engine
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Coolant Temperature Engine coolant temperature Min.: -40°C (-40°F), Max.: 140°C (284°F) 75 to 100°C (167 to 212°F): After warming up This is the engine coolant temperature.
HINT:
·

After warming up the engine, the engine coolant temperature will be 75 to 100°C (167 to 212°F).

·

After a long soak, the engine coolant temperature, intake air temperature and ambient air temperature will be approximately equal.

·

If the value is -40°C (-40°F), or higher than 135°C (275°F), the sensor circuit is open or shorted.

·

Check if the engine overheats if the value indicated is higher than 135°C (275°F).



Powertrain > Engine > Data List
Tester Display
Coolant Temperature
50003 372 205
OK:

The value of the display does not change frequently.



Result:
Proceed to
OK
NG



OK

GO TO ON-VEHICLE INSPECTION (CHECK REFRIGERANT PRESSURE USING GAUGE)

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>ON-VEHICLE INSPECTION


NG

GO TO COOLING SYSTEM

for 7GR-FKS:Engine / Hybrid System>7GR-FKS (COOLING)>COOLING SYSTEM>ON-VEHICLE INSPECTION

for 1GD-FTV:Engine / Hybrid System>1GD-FTV (COOLING)>COOLING SYSTEM>ON-VEHICLE INSPECTION



4.READ VALUE USING GTS (COOLANT TEMPERATURE)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and Transmission / Data List.


e.

Read the Data List according to the display on the GTS.

Powertrain > Engine and Transmission > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Coolant Temperature Engine coolant temperature Min.: -40°C (-40°F), Max.: 140°C (284°F) 75 to 100°C (167 to 212°F): After warming up This is the engine coolant temperature.
HINT:
·

After warming up the engine, the engine coolant temperature will be 75 to 100°C (167 to 212°F).

·

After a long soak, the engine coolant temperature, intake air temperature and ambient air temperature will be approximately equal.

·

If the value is -40°C (-40°F), or higher than 135°C (275°F), the sensor circuit is open or shorted.

·

Check if the engine overheats if the value indicated is higher than 135°C (275°F).



Powertrain > Engine and Transmission > Data List
Tester Display
Coolant Temperature
50003 456 237
OK:

The value of the display does not change frequently.



Result:
Proceed to
OK
NG



OK

GO TO ON-VEHICLE INSPECTION (CHECK REFRIGERANT PRESSURE USING GAUGE)

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>ON-VEHICLE INSPECTION


NG

GO TO COOLING SYSTEM

Click hereEngine / Hybrid System>1GD-FTV (COOLING)>COOLING SYSTEM>ON-VEHICLE INSPECTION