Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73330H
1.INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY RH
Install the rear seat lap type belt assembly RH with the bolt.
2.INSTALL SEAT CUSHION COVER WITH PAD
71868T
3.INSTALL REAR SEAT INNER NO. 1 CUSHION SHIELD LH
73380A
4.INSTALL REAR SEAT INNER BELT ASSEMBLY RH
71833K
5.INSTALL NO. 1 SEAT OUTER NO. 1 RECLINING COVER RH
73330G
6.INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY LH
| *a | Protruding Part |
Install the rear seat lap type belt assembly LH with the bolt.
Do not allow the anchor part of the rear seat lap type belt assembly LH to overlap the protruding part.
71834J
7.INSTALL NO. 1 SEAT OUTER NO. 1 RECLINING COVER LH
79967U
8.INSTALL REAR NO. 1 SEAT NO. 2 LEG SIDE COVER
79967T
9.INSTALL REAR NO. 1 SEAT NO. 1 LEG SIDE COVER
79967V
10.INSTALL REAR NO. 1 SEAT NO. 3 LEG SIDE COVER
11.INSTALL REAR SEAT ASSEMBLY LH