The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.
| Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
·
Replacement of ignition coil assembly ·
Replacement of spark plug |
Inspection after repair | ·
Poor idle, etc. ·
Engine start function, etc. |
( 201902,999999,_51,_078720,_0381907,RM100000001G2VV,)
|
17190
1.REMOVE INTAKE AIR SURGE TANK ASSEMBLY
2.REMOVE AIR SWITCHING VALVE ASSEMBLY (w/ Secondary Air Injection System)
12601B
3.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
82715
4.REMOVE WIRE HARNESS CLAMP BRACKET
19500
5.REMOVE IGNITION COIL ASSEMBLY
19100P
6.REMOVE SPARK PLUG
Remove the 6 spark plugs from the cylinder head sub-assembly.
If a spark plug has been struck or dropped, replace it.