If an ECM that is incompatible with the immobiliser system is installed, the ECM stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B279C95 | Engine Immobiliser System Incorrect Assembly | An ECM that is incompatible with immobiliser system is installed. | ECM | DTC Output Confirmation Operation:
Check for DTCs. |
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| Engine cannot be started | - |
| DTC No. | Data List and Active Test |
|---|---|
| B279C95 | - |
Before replacing the ECM, refer to the Service Bulletin.
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
Replace the ECM with a new one.
for 7GR-FKS:
for 1GD-FTV:
| Proceed to |
|---|
| NEXT |
NEXT