These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication line.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | A problem with the engine information signal from the ECM | CAN communication system |
| U0101 | Lost Communication with TCM | A problem with the shift position information signal from the ECM | CAN communication system |
| U0142 | Lost Communication with Body Control Module "B" | A problem with the vehicle information signal from the main body ECU (multiplex network body ECU) | CAN communication system |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | A problem with the vehicle speed information signal from the combination meter assembly | CAN communication system |
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.
Clear the DTCs.
Check for CAN communication system DTCs.
| Result | Proceed to |
|---|---|
| DTC U0100, U0101, U0142 and U0155 are not output | A |
| DTC U0100, U0101, U0142 or U0155 is output | B |
A
B