When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle and a DTC may be stored.
When the millimeter wave radar sensor assembly is replaced, be sure to adjust the millimeter wave radar sensor assembly beam axis, perform front radar G sensor learning, and clear the vehicle control history for each system.
Front Beam Axis Adjustment
Front Beam Axis Adjustment is used to calibrate the beam axis of millimeter wave radar sensor assembly.
Perform Front Beam Axis Adjustment according to the display on the GTS.
| Tester Display |
|---|
| Front Beam Axis Adjustment |
Front Beam Axis Misalignment Reading
Front Beam Axis Misalignment Reading is used to check the amount of misalignment of the millimeter wave radar sensor assembly.
Perform Front Beam Axis Misalignment Reading according to the display on the GTS.
| Tester Display |
|---|
| Front Beam Axis Misalignment Reading |
Front Radar Acceleration Sensor Calibration
Front Radar Acceleration Sensor Calibration is used to perform calibration of the acceleration sensor in the millimeter wave radar sensor assembly.
Perform Front Radar Acceleration Sensor Calibration according to the display on the GTS.
| Tester Display |
|---|
| Front Radar Acceleration Sensor Calibration |