RM35X0E _51 Engine / Hybrid System _078604 7GR-FKS LUBRICATION _0381347 LUBRICATION SYSTEM G

7GR-FKS LUBRICATION  LUBRICATION SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT ENGINE OIL LEVEL

a.

Warm up the engine, and then stop the engine and wait for 5 minutes.


b.

Check that the engine oil level is between the low level and full level marks on the dipstick.

If low, check for leakage and add oil up to the full level mark.

NOTICE:

Do not fill engine oil above the full level mark.



Hide 2.INSPECT OIL QUALITY

a.

Check the oil for deterioration, water contamination, discoloration or thinning.

If the quality is visibly poor, replace the oil and oil filter element.

Click hereEngine / Hybrid System>7GR-FKS (LUBRICATION)>OIL AND OIL FILTER>REPLACEMENT


Hide 3.INSPECT OIL PRESSURE

a.

Remove the engine oil pressure switch assembly.

Click hereEngine / Hybrid System>7GR-FKS (LUBRICATION)>OIL PRESSURE SWITCH>REMOVAL


b.
A436659C01
0.24,0.667 0.365,0.667 0.365,0.667 0.469,0.823 true 0.021,0.573 0.229,0.792 0.208,0.219 10 true *a
*a Oil Pressure Gauge


Install an oil pressure gauge.


c.

Warm up the engine.


d.

Inspect the oil pressure.

Standard Oil Pressure:
Condition Specified Condition
Idling 29 kPa (0.3 kgf/cm2, 4.2 psi) or higher
3000 rpm 294 to 588 kPa (3.0 to 6.0 kgf/cm2, 43 to 85 psi)


If the pressure is not as specified, check the oil pump.

Click hereEngine / Hybrid System>7GR-FKS (LUBRICATION)>OIL PUMP>INSPECTION


e.

Remove the oil pressure gauge.


f.

Install the engine oil pressure switch assembly.

Click hereEngine / Hybrid System>7GR-FKS (LUBRICATION)>OIL PRESSURE SWITCH>INSTALLATION