RM35X0E _59 Vehicle Exterior _078503 DOOR / HATCH _0381019 BACK DOOR CLOSER SYSTEM Y

DOOR / HATCH  BACK DOOR CLOSER SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

Use the following procedure to troubleshoot the back door closer system.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.INSPECT BATTERY
2.INSPECT BATTERY
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V


HINT:
·

A simple method to determine whether the battery is discharged is to operate the horn.

·

If the voltage is below 11 V, recharge or replace the battery before proceeding.




b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

3.PROBLEM SYMPTOMS TABLE
3.PROBLEM SYMPTOMS TABLE
a.

Refer to Problem Symptoms Table.

Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR CLOSER SYSTEM>PROBLEM SYMPTOMS TABLE


Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table A
Fault is listed in Problem Symptoms Table B



A

4.OVERALL ANALYSIS AND TROUBLESHOOTING

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

5.ADJUST, REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

6.CONFIRMATION TEST
6.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END