TELEMATICS TELEMATICS SYSTEM(for TOYOTA Connect) VEHICLE CONTROL HISTORY
- NOTICE:
-
Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.
CHECK VEHICLE CONTROL HISTORY
Using the GTS to perform the "Vehicle Control History (RoB)".
- Body Electrical > Telematics > Utility
-
Tester Display Vehicle Control History (RoB) - 50005 459 55
| Code | Tester Display | Description | Diagnostic Note |
|---|---|---|---|
| X2210 | Life Cycle of DCM Backup Battery | When the system detects that the mobilephone battery has reached the end of its lifespan. | ·
The emergency call switch red indicator blinks ·
Replace mobilephone battery
|
| X2211 | Low DCM Backup Battery Charge | When the mobile phone battery charge is low. | - |
| X2601 | Software Inconsistency with ENG/HV Control Module | The VIN number received via CAN communication does not match that stored in the DCM. | ·
The emergency call switch red indicator blinks ·
Perform VIN Synchronization |
| X2212 | Diagnostics Communication Flow Failure | Diagnostics communication flow failure (ID, Mode/SID difference). | - |
| X2213 | Emergency Call Switch Stuck On | The emergency call switch is on for 5 minutes or more | Replace map light sub-assembly
(  202201,999999,_58,_112288,_0501071,RM100000001Z4U4,)
|
| X2214 | Communication Blackout from Power Distribution Controller ECU | Lost Communication with ECM. | Check CAN Communication System
for HEV Model: |
| X2215 | Non Approval of the Reprograming | User did not approve software update. | - |
| X2216 | Failure of the Reprogramming | Software writing failed. | - |
| X2217 | Inconsistent Startup Software | Software writing succeeded, but started software does not match package. | - |
| X2218 | Communication Blackout from Body Controller ECU | Lost communication with main body ECU (multiplex network body ECU) | Check CAN Communication System
for HEV Model: |
| X21D4 | Reprograming Telematics ECU by OTA Start/Finish | At the time of a start of the software update of DCM by the OTA, I memorize it at the time of success. | - |
CLEAR VEHICLE CONTROL HISTORY
- NOTICE:
-
By performing this procedure, all stored Vehicle Control History will be cleared.
Using the GTS to perform the "Vehicle Control History (RoB)" (Clear).
- Body Electrical > Telematics > Utility
-
Tester Display Vehicle Control History (RoB) - 50005 459 55
According to the display on the GTS, clear the Vehicle Control History (RoB).