CHECK CUSTOMIZE PARAMETERS
The operation check below is based on the non-customized initial condition of the vehicle.
CHECK BASIC FUNCTION
Check that all doors lock when the lock side of the door control switch is pressed.
Check that all doors unlock when the unlock side of the door control switch is pressed.
Check that all doors lock when the door key cylinder is turned to lock using the mechanical key.
Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the mechanical key and all doors unlock when it is turned to unlock again.*1
Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.*2
*1: Customize item "Unlock Key Twice Function" is set to "Enable".
*2: Customize item "Unlock Key Twice Function" is set to "Disable".
CHECK KEY LOCK-IN PREVENTION FUNCTION
In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.
Turn the ignition switch to ON or ACC.*1
Insert the key into the ignition key cylinder.*2
With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.
With the driver door open, check that all of the doors unlock immediately after the lock side of the door control switch is pressed.
With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.
*1: w/ Smart Entry and Start System
*2: w/o Smart Entry and Start System
CHECK SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM
Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)
Hold the outside handle of the driver door, open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation*1. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.
Check that the security function of the door lock control system is canceled under the following conditions:
The hybrid control system is started.*1
The engine is started.*2
The unlock side of the door control switch is pressed when the lock position of any door is unlock.
The doors are unlocked by using the mechanical key.
The doors are unlocked by wireless operation.
The doors are unlocked by entry operation.*3
*1: for HEV Model
*2: for Gasoline Model
*3: w/ Smart Entry and Start System
CHECK DRIVER DOOR-LINKED AUTOMATIC DOOR UNLOCK FUNCTION
The driver door-linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.
When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within approximately 45 seconds will automatically unlock all doors.
CHECK KEY-LINKED 2-STEP UNLOCK FUNCTION
Lock all doors.
Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all doors unlock when it is turned to unlock again.
CHECK ILLUMINATED ENTRY FUNCTION