The airbag ECU assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.
These DTCs are stored when the skid control ECU (brake actuator assembly) receives a malfunction signal from the yaw rate and acceleration sensor (airbag ECU assembly).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from | Note |
|---|---|---|---|---|---|---|
| C00631F | Yaw Rate Sensor Circuit Intermittent | When the voltage at terminal +BS is between 9.6 and 16.5 V, data malfunction signal is received from the yaw rate sensor (airbag ECU assembly) for 1 second or more. | Yaw rate sensor (airbag ECU assembly) | Does not come on | Brake/EPB | Output ECU: Skid control ECU (brake actuator assembly) |
| C006396 | Yaw Rate Sensor Component Internal Failure | With the +BS terminal voltage between 9.6 and 16.5 V, a yaw rate sensor internal malfunction signal is received from the yaw rate sensor (airbag ECU assembly). | Yaw rate sensor (airbag ECU assembly) | Does not come on | Brake/EPB | Output ECU: Skid control ECU (brake actuator assembly) |
| C11781F | Multi-axis Acceleration Sensor Module "A" Circuit Intermittent | When the voltage at terminal +BS is between 9.6 and 16.5 V, data malfunction signal is received from the acceleration sensor (airbag ECU assembly) for 10 seconds or more. | Acceleration sensor (airbag ECU assembly) | Does not come on | Brake/EPB | Output ECU: Skid control ECU (brake actuator assembly) |
| C117896 | Multi-axis Acceleration Sensor Module "A" Component Internal Failure | With the +BS terminal voltage between 9.6 and 16.5 V, an acceleration sensor internal malfunction signal is received from the acceleration sensor (airbag ECU assembly). | Acceleration sensor (airbag ECU assembly) | Does not come on | Brake/EPB | Output ECU: Skid control ECU (brake actuator assembly) |
| Proceed to |
|---|
| NEXT |
NEXT