RM38T0EC
_58
Vehicle Interior
_112290
POWER OUTLETS (INT)
_0606057
WIRELESS CHARGING SYSTEM
U
POWER OUTLETS (INT) WIRELESS CHARGING SYSTEM TERMINALS OF ECU
CHECK MOBILE WIRELESS CHARGER CRADLE ASSEMBLY
3.396,0.177 3.792,0.427
0.396,0.25
3.458,0.208 3.802,0.375
0.344,0.167
10
false
I287
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I287-1 (ACC) - I287-3 (PGND) | Power source (ACC) | Ignition switch off → Ignition switch ACC | Below 1 V → 11 to 14 V |
| I287-2 (DIS) - Body ground | Charging suspension signal | For 2 seconds after turning ignition switch from off to ACC*1 | 4.5 to 6.0 V |
| Device being charged | Below 1 V | ||
| Charging suspended due to smart entry and start system status*2 | 4.5 to 6.0 V | ||
| I287-3 (PGND) - Body ground | Ground | Always | Below 1 Ω |
*1: When the ignition switch is turned from off to ACC, the mobile wireless charger cradle assembly monitors the charging suspension signal for 2 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly determines that there is an open in the charging suspension signal line, blinks (pattern 2) the indicator light (red), and prohibits operation until the ignition switch is turned from off to ACC again.
*2: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.