RM38T0EC _59 Vehicle Exterior _114986 SLIDING ROOF / CONVERTIBLE _0584017 PANORAMIC MOON ROOF SYSTEM(Production Date from 2023/04) Y

SLIDING ROOF / CONVERTIBLE  PANORAMIC MOON ROOF SYSTEM(Production Date from 2023/04)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use the following procedure to troubleshoot the panoramic moon roof system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:

What Vehicle model, system name
When Date, time, occurrence frequency
Where Road conditions
Under what conditions? Driving conditions, weather conditions
How did it happen? Problem symptoms



Result:
Proceed to
NEXT



NEXT

3.INSPECT AUXILIARY BATTERY
3.INSPECT AUXILIARY BATTERY
a.

Measure the auxiliary battery voltage with the ignition switch off.

Standard voltage:

11 to 14 V


HINT:
·

A simple method to determine whether the auxiliary battery is discharged is to operate the horn.

·

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding.




b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
a.

Using the GTS, check for CAN communication system DTCs.

for HEV Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HEV Model)>DIAGNOSIS SYSTEM

for Gasoline Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>DIAGNOSIS SYSTEM



Result:
Result Proceed to
CAN DTCs are not output A
CAN DTCs are output (for HEV Model) B
CAN DTCs are output (for Gasoline Model) C



A

5.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

B

GO TO CAN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HEV Model)>HOW TO PROCEED WITH TROUBLESHOOTING


C

GO TO CAN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING


5.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
a.

Using the GTS, check for LIN communication system DTCs.


Result:
Result Proceed to
LIN DTCs are not output A
LIN DTCs are output B



A

6.CHECK FOR DTC*

B

GO TO LIN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING


6.CHECK FOR DTC*
a.

Check for DTCs and make a note of any codes that are output.

Body Electrical > Main Body > Trouble Codes
50001 449

b.

Clear the DTCs.

Body Electrical > Main Body > Clear DTCs
50002 449

c.

Recheck for DTCs.

Body Electrical > Main Body > Trouble Codes
50001 449

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

7.PROBLEM SYMPTOMS TABLE

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

7.PROBLEM SYMPTOMS TABLE
a.

Refer to Problem Symptoms Table.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM (Production Date from 2023/04)>PROBLEM SYMPTOMS TABLE


Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table A
Fault is listed in Problem Symptoms Table B



A

8.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

9.ADJUST, REPAIR OR REPLACE
9.ADJUST, REPAIR OR REPLACE
a.

Check if the sliding roof ECU (sliding roof drive gear sub-assembly) or roof sunshade ECU (sliding roof drive gear sub-assembly) has been replaced, or the sliding roof glass sub-assembly, sliding roof housing panel, slide roof rail sub-assembly or sunshade trim sub-assembly has been adjusted, or removed and installed.


Result:
Result Proceed to
The sliding roof ECU (sliding roof drive gear sub-assembly) or roof sunshade ECU (sliding roof drive gear sub-assembly) has been replaced, or the sliding roof glass sub-assembly, sliding roof housing panel, slide roof rail sub-assembly or sunshade trim sub-assembly has been adjusted, or removed and installed A
The sliding roof ECU (sliding roof drive gear sub-assembly) and roof sunshade ECU (sliding roof drive gear sub-assembly) have not been replaced, and the sliding roof glass sub-assembly, sliding roof housing panel, slide roof rail sub-assembly and sunshade trim sub-assembly have not been adjusted, or removed and installed B



A

10.INITIALIZE PANORAMIC MOON ROOF SYSTEM

B

11.CONFIRMATION TEST
11.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END