DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly (for RH) signal | Close or Open | Close: Front door RH closed
Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly (for LH) signal | Close or Open | Close: Front door LH closed
Open: Front door LH open |
- |
| IGR Power | Ignition switch status | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
"OFF" is displayed even though the ignition switch is ACC. |
| Roof OPEN Switch | Sliding roof open switch | OFF or ON | OFF: Sliding roof open switch not pressed
ON: Sliding roof open switch pressed |
- |
| Roof CLOSE Switch | Sliding roof close switch | OFF or ON | OFF: Sliding roof close switch not pressed
ON: Sliding roof close switch pressed |
- |
| VENT Switch | Sliding roof tilt switch | OFF or ON | OFF: Sliding roof tilt switch not pressed
ON: Sliding roof tilt switch pressed |
- |
| Fr Shade OPEN Switch | Front roof sunshade open switch | OFF or ON | OFF: Roof sunshade open switch not pressed
ON: Roof sunshade open switch pressed |
- |
| Fr Shade CLOSE Switch | Front roof sunshade close switch | OFF or ON | OFF: Roof sunshade close switch not pressed
ON: Roof sunshade close switch pressed |
- |
| Roof Initialize Status | Sliding roof initialize status | Initialized or Uninitialized | Display initialization status | - |
| Communication Sunshade ECU | Connection status between roof sunshade ECU and main body ECU (multiplex network body ECU) | STOP or OK | STOP: Communication stopped
OK: Normal communication |
- |
| Communication Slide Roof | Connection status between sliding roof ECU and main body ECU (multiplex network body ECU) | STOP or OK | STOP: Communication stopped
OK: Normal communication |
- |
| Door Key P/W Up Function | Key-linked power windows and sliding roof close function | Disable or Enable | Customize setting displayed | - |
| Door Key P/W Down Function | Key-linked power windows and sliding roof open function | Disable or Enable | Customize setting displayed | - |
| P/W Up W/ Transmit Function | Wireless transmitter-linked power windows and sliding roof close function*1 | Disable or Enable | Customize setting displayed | - |
| P/W Down W/ Transmit Function | Wireless transmitter-linked power windows and sliding roof open function | Disable or Enable | Customize setting displayed | - |
| Window Open Warning Function | Wireless transmitter-linked power windows and sliding roof open function | Disable or Enable | Customize setting displayed | - |
| Slide Roof Open Warning Function | Sliding roof open warning function | Disable or Enable | Customize setting displayed | - |
| Wireless Key Related Operation Setting | Function to select tilt up or slide open of sliding roof wireless transmitter-linked function | Slide or Tilt | Customize setting displayed | - |
| Door Key Related Operation Setting | Function to select tilt up or slide open of sliding roof key-linked function | Slide or Tilt | Customize setting displayed | - |
| Slide Roof Voice Control Function | Status of slide roof open/close linked voice recognition control*2 | Disable or Enable | Customize setting displayed | - |
| Roof Switch Auto Operation Setting | Sliding roof auto operation function | Disable or Enable | Customize setting displayed | - |
*1: w/ Wireless Transmitter-linked Power Windows and Sliding Roof Close Function
*2: w/ Body Device Voice Recognition Function
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Sliding Roof Open | Sliding roof open activate | OFF/ON | - |
| Sliding Roof Close | Sliding roof close activate | OFF/ON | - |
| Fr Shade Open | Front roof sunshade open activate | OFF/ON | - |
| Fr Shade Close | Front roof sunshade close activate | OFF/ON | - |