These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| B15A096 | LAN Master Component Internal Failure | When any of the following conditions is met:
(2 trip detection logic) ·
Bus malfunction ·
Internal power source malfunction ·
Internal hardware malfunction ·
DSP malfunction ·
EEPROM malfunction ·
Storage malfunction |
Radio and display receiver assembly | Navigation System | A |
| B15AD96 | Navigation Processor Component Internal Failure | When any of the following conditions is met:
(2 trip detection logic) ·
Gyro sensor malfunction ·
GNSS receiver malfunction ·
G sensor malfunction |
Radio and display receiver assembly | Navigation System | A |
| B15B396 | Radio Tuner Component Internal Failure | A radio tuner internal communication malfunction is detected
(2 trip detection logic) |
Radio and display receiver assembly | Navigation System | A |
| B15B796 | Bluetooth Module Component Internal Failure | A "Bluetooth" module internal malfunction is detected
(2 trip detection logic) |
Radio and display receiver assembly | Navigation System | A |
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Pre-procedure1
Turn the ignition switch off.
Procedure1
Check for DTCs and proceed to the following step.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTC B15A096, B15AD96, B15B396 or B15B796 is output | B |
Post-procedure1
None
A
B