DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Enter the following menus: Body Electrical / (desired system) / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Lock Position Switch Status | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked
UNLOCK: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked
UNLOCK: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Rear door RH locked
UNLOCK: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Rear door LH locked
UNLOCK: Rear door LH unlocked |
- |
| Back Door Lock Position Status | Back door courtesy switch signal | LOCK or UNLOCK | LOCK: Back door locked
UNLOCK: Back door unlocked |
|
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly (RH) signal | CLOSE or OPEN | CLOSE: Front door RH closed
OPEN: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly (LH) signal | CLOSE or OPEN | CLOSE: Front door LH closed
OPEN: Front door LH open |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch assembly (RH) signal | CLOSE or OPEN | CLOSE: Rear door RH closed
OPEN: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch assembly (LH) signal | CLOSE or OPEN | CLOSE: Rear door LH closed
OPEN: Rear door LH open |
- |
| Back Door Courtesy Switch Status | Back door courtesy switch signal | CLOSE or OPEN | CLOSE: Back door closed
OPEN: Back door open |
- |
| IGR Power | Ignition switch ON signal | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Panel Light Input Signal | Panel light input condition | OFF or ON | OFF: Light control switch not in tail position
ON: Light control switch in tail position |
- |
| Panel Light Output Signal | Panel light output condition | OFF or ON | OFF: Light control switch not in tail or head position
ON: Light control switch in tail or head position |
- |
| Panel Light Output Current | Panel light current | Min.: 0, Max.: 255 A | Below 3.2 A | Panel light current when output is on |
| Panel Light Fuse Shut Off Status | Panel Light Fuse condition | OFF or ON | OFF: Fuse not shut off
ON: Fuse shut off |
- |
| Panel Light Fuse Shut Off Count | Panel light fuse shut off history | Min.: 0, Max.: 255 | Number of fuse shut off displayed | - |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Enter the following menus: Body Electrical / (desired system) / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system*1 | OFF or ON | Perform the Active Test with DOOR switch in the map light assembly and room light assembly turned on. |
| Front Footwell Lights | Operation of the following lights:
·
Front door ambient illumination light (front door trim board subassembly) ·
Center tray illumination light (No. 1 interior illumination light assembly) ·
Cup holder light (Console box pocket garnish) |
OFF or ON | *2 |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | OFF or ON | When performing this Active Test, turn all the interior lights on.
·
OFF: DOME CUT relay on (interior lights turn on) ·
ON: DOME CUT relay off (interior lights turn off) |
*1: Refer to System Description for the lights that are controlled by the illuminated entry system.
*2: w/ Ambient Illumination Light
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Start SW Light Power Supply | Push start switch illumination | OFF or ON | *1 |
*1: w/ Smart Entry and Start System