RM36D0EC
_54
Brake
_083081
PARKING BRAKE
_0403276
ELECTRIC PARKING BRAKE SWITCH
G
PARKING BRAKE ELECTRIC PARKING BRAKE SWITCH INSPECTION
PROCEDURE
84010D
1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (ELECTRIC PARKING BRAKE SWITCH)
a.
Check the resistance.
i.
1.792,1.698 1.479,1.292
true
1.375,1.729 1.313,1.323
true
0.948,1.708 1.135,1.281
true
0.49,1.635 1,1.281
true
0.156,0.115 0.469,0.313
0.313,0.198
10
false
*a
1.76,1.74 2.146,1.969
0.385,0.229
10
false
SWI1
0.698,1.76 1.167,2.01
0.469,0.25
10
false
SWO1
1.24,1.771 1.625,2
0.385,0.229
10
false
SWI2
0.177,1.667 0.646,1.917
0.469,0.25
10
false
SWO2
| *a | Component without harness connected
Integration Control and Panel Assembly (Electric Parking Brake Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 20 (SWI1) - 21 (SWI2) OFF (Release) Below 1 Ω ON (Lock) Below 1 Ω Switch not operated 10 kΩ or higher 20 (SWI1) - 22 (SWO1) OFF (Release) 10 kΩ or higher ON (Lock) Below 1 Ω Switch not operated 10 kΩ or higher 20 (SWI1) - 23 (SWO2) OFF (Release) Below 1 Ω ON (Lock) 10 kΩ or higher Switch not operated Below 1 Ω 22 (SWO1) - 21 (SWI2) OFF (Release) 10 kΩ or higher ON (Lock) Below 1 Ω Switch not operated Below 1 Ω 22 (SWO1) - 23 (SWO2) OFF (Release) 10 kΩ or higher ON (Lock) 10 kΩ or higher Switch not operated 10 kΩ or higher
If the result is not as specified, replace the integration control and panel assembly (electric parking brake switch).
b.
Inspect the illumination:
i.
0.844,0.979 1.042,0.417
1.042,0.417 1.24,0.417
true
2.542,1 2.667,0.438
2.667,0.438 2.823,0.438
true
0.104,0.135 0.417,0.292
0.313,0.156
10
false
*a
2.865,0.365 3.271,0.635
0.406,0.271
10
false
ILL-
1.292,0.333 1.906,0.531
0.615,0.198
10
false
ILL+
| *a | Component without harness connected
Integration Control and Panel Assembly (Electric Parking Brake Switch) |
Apply battery voltage to the integration control and panel assembly (electric parking brake switch) and check that the switch illuminates.
- OK:
Condition Specified Condition Battery positive (+) → Terminal 12 (ILL+)
Battery negative (-) → Terminal 1 (ILL-)Illuminates
If the result is not as specified, replace the integration control and panel assembly (electric parking brake switch).