DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Driver Buckle Switch | Driver side seat belt buckle switch status | Fastened or Not Fastened | Fastened: Driver side seat belt fastened
Not Fastened: Driver side seat belt not fastened |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Passenger Seat Buckle Switch Status | Front passenger side seat belt buckle switch status | Set, Unset or Unknown | Set: Front passenger side seat belt fastened
Unset: Front passenger side seat belt not fastened Unknown: Data is not determined |
- |
| Passenger Seat Occupant Sensor Status | Front passenger seat occupant detection sensor status | OFF, ON or Unknown | OFF: Front passenger seat not occupied
ON: Front passenger seat occupied Unknown: Data is not determined |
- |
| Rear Seat RH Buckle Switch Status | Rear RH seat belt buckle switch status | Set, Unset or Unknown | Set: Rear RH seat belt fastened
Unset: Rear RH seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat Center Buckle Switch Status | Rear center seat belt buckle switch status | Set, Unset or Unknown | Set: Rear center seat belt fastened
Unset: Rear center seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat LH Buckle Switch Status | Rear LH seat belt buckle switch status | Set, Unset or Unknown | Set: Rear LH seat belt fastened
Unset: Rear LH seat belt not fastened Unknown: Data is not determined |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| RR Door Courtesy Switch Status | Rear door courtesy light switch assembly RH signal | Close or Open | Close: Rear door RH closed
Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch assembly LH signal | Close or Open | Close: Rear door LH closed
Open: Rear door LH open |
- |
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Driver Side Seat Belt Warning | Front seat belt warning light | ON or OFF | - |