FUNCTION OF WARNING INDICATOR AND MESSAGE
If the pre-collision system is not functioning properly, the driver is warned by the PCS warning light and a warning message displayed on the multi-information display.
| PCS Warning Indicator | Warning Message | Detail | DTC/RoB |
|---|---|---|---|
| Illuminated | "Pre-Collision System Malfunction Visit Your Dealer" is displayed | Pre-collision system malfunctioning | Stored |
| Illuminated | "Pre-Collision System Unavailable See Owner's Manual" | Millimeter wave radar sensor assembly voltage malfunction | Stored |
| Illuminated | "Pre-Collision System Out of Temperature Range Unavailable See Owner's Manual" | Millimeter wave radar sensor assembly temperature malfunction | Stored |
| Illuminated | "Pre-Collision System Radar In Self Calibration Unavailable See Owner's Manual" | Millimeter wave radar sensor assembly misaligned | Stored |
| Illuminated | "Pre-Collision System Radar Sensor Blocked Unavailable Clean Radar Sensor" | Foreign matter attached to millimeter wave radar sensor assembly | Stored |
| Illuminated | "Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature" | Forward recognition camera temperature outside of operational range | Stored |
| Illuminated | "Front Camera Unavailable See Owner's Manual" | ·
Abnormal forward recognition camera voltage ·
Other forward recognition camera malfunction |
Stored |
| Illuminated | "Front Camera Low Visibility Unavailable See Owner's Manual" | ·
Foreign matter attached to forward recognition camera or area of windshield in front of forward recognition camera ·
Forward recognition camera or area of windshield in front of forward recognition camera is fogged up |
Stored |
| PCS Warning Light | Condition |
|---|---|
| Illuminates | ·
Pre-collision system malfunctioning ·
Pre-collision system temporarily disabled ·
Pre-collision system disabled ·
VSC system disabled |
| Not illuminated | Other |
INITIAL CHECK
An initial check is performed when the ignition switch is off for more than 2 seconds and then turned to ON. The initial check consists of a pre-collision system diagnostic check with a duration of approximately 3 seconds.
If a malfunction is detected during the initial check, the PCS warning light in the combination meter assembly will illuminate and a warning message indicating the pre-collision system is malfunctioning or disabled will be displayed on the multi-information display.
CONSTANT CHECK
The forward recognition camera constantly monitors the pre-collision system for malfunctions after the ignition switch is turned to ON and the initial check (approximately 3 seconds) has completed.
If a malfunction is detected during the constant check, the PCS warning light in the combination meter assembly will illuminate and a warning message indicating the pre-collision system is malfunctioning or disabled will be displayed on the multi-information display.