89120A
1.INSTALL AUTOMATIC LIGHT CONTROL SENSOR
Attach the claw and install the automatic light control sensor as shown in the illustration.
|
Install in this Direction | - | - |
Connect the connector.
2.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
5. PERFORM DIAGNOSTIC SYSTEM CHECK
6.CHECK SRS WARNING LIGHT
7.INSPECT AUTOMATIC LIGHT CONTROL SYSTEM