RM36D0EC _51 Engine / Hybrid System _083055 CRUISE CONTROL _0401000 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model)  U010087  Lost Communication With ECM/PCM "A" Missing Message  U010487  Lost Communication with Cruise Control Module Missing Message  U012287  Lost Communication with Vehicle Dynamics Control Module Missing Message  U015500  Lost Communication With Instrument Panel Cluster (IPC) Control Module  


DESCRIPTION

The ECM communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U010087 Lost Communication With ECM/PCM "A" Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the skid control ECU (brake actuator assembly) and ECM is detected for approximately 1 second or more. CAN communication system Cruise Control
U010487 Lost Communication with Cruise Control Module Missing Message When the ignition switch is ON and the dynamic radar cruise control system is operating, a communication malfunction between the millimeter wave radar sensor assembly and ECM is detected for approximately 1 second or more. CAN communication system Cruise Control
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message When the ignition switch is ON and the dynamic radar cruise control system is operating, a communication malfunction between the skid control ECU (brake actuator assembly) and ECM is detected for approximately 2.6 seconds or more. CAN communication system Cruise Control
U015500 Lost Communication With Instrument Panel Cluster (IPC) Control Module After approximately 2 seconds have elapsed since turning the ignition switch to ON and with the dynamic radar cruise control system on, data communication is lost from the combination meter assembly to the ECM for approximately 7 seconds or more. CAN communication system Cruise Control

PROCEDURE

1.CHECK FOR DTCs (Radar Cruise1)
a.

Clear the DTCs.

Powertrain > Cruise Control > Clear DTCs
50002 374

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Powertrain > Cruise Control > Trouble Codes
50001 374

Result:
Result Proceed to
DTC U010087, U010487, U012287 and U015500 are not output A
DTC U010087, U010487, U012287 or U015500 is output B



A

B