DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  PRECAUTION  

When using the GTS with the ignition switch off to troubleshoot:

Connect the GTS to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the GTS and vehicle begins.

After all DTCs are cleared, check if the malfunction occurs again 6 seconds after the ignition switch is turned to ON.

If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.

When the airbag ECU assembly is replaced, update the ECU security key.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY202405,999999,_V1,_083041,_0402305,RM100000002ISNL,

After turning the ignition switch off, disconnect the cable from the negative (-) auxiliary battery terminal.

NOTICE:

·

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>BEFORE DISCONNECTING BATTERY202304,999999,_V1,_083041,_0402304,RM100000002AYZV,

·

When disconnecting and reconnecting the auxiliary battery

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202409,999999,_V1,_083041,_0402304,RM100000002NY03,