CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 6E-5 (CXP1) - Body ground | CXPI communication line | Ignition switch ON | Pulse generation |
| G169-6 (WPS) - Body ground | Windshield wiper relay (WIPER) operation signal | Ignition switch ON | 11 to 14 V |
| Less than approximately 60 seconds after ignition switch off | |||
| Approximately 60 seconds or more after ignition switch off | Below 1 V | ||
| G169-11 (RWRY) - Body ground | Rear wiper motor assembly operation signal | Rear wiper motor assembly stopped | 11 to 14 V |
| Rear wiper motor assembly operating | Below 1 V |
CHECK WINDSHIELD WIPER RELAY ASSEMBLY
Disconnect the A5 and A6 windshield wiper relay assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A5-3 (E) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| A5-5 (EWS) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| A5-6 (IGWS) - Body ground | Y - Body ground | Washer circuit IG power source | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | |||
| A5-8 (+B) - Body ground | P - Body ground | Ignition switch signal (Power source circuit) | Ignition switch ON | 11 to 14 V |
| Less than approximately 60 seconds after ignition switch off | ||||
| Approximately 60 seconds or more after ignition switch off | Below 1 V | |||
| A6-5 (ES) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
Connect the A5 and A6 windshield wiper relay assembly connectors.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A5-1 (+WR) - Body ground | B - Body ground | Front washer operation signal | Ignition switch ON, front washer operating | 11 to 14 V |
| A5-2 (+1) - Body ground | R - Body ground | LO operation signal to windshield wiper motor assembly | Ignition switch ON, windshield wiper motor assembly operating in LO | 11 to 14 V |
| A5-4 (+2) - Body ground | W - Body ground | HI operation signal to windshield wiper motor assembly | Ignition switch ON, windshield wiper motor assembly operating in HI | 11 to 14 V |
| A5-7 (-WR) - Body ground | R - Body ground | Rear washer operation signal | Ignition switch ON, rear washer operating | 11 to 14 V |
| A6-3 (2S) - Body ground | L - Body ground | Windshield wiper motor assembly HI operation signal | Windshield wiper motor assembly stopped | 4.5 to 5.5 V |
| Windshield wiper motor assembly operating in LO | 9 to 14 V | |||
| Windshield wiper motor assembly operating in HI | Below 1 V | |||
| A6-4 (MPX1) - Body ground | R - Body ground | CXPI communication line | Ignition switch ON | Pulse generation |
| A6-6 (+SM) - Body ground | G - Body ground | Windshield wiper motor assembly position detection signal | Windshield wiper motor assembly in LO or HI operation | Below 1 V ←→ 10 to 14 V |
| Windshield wiper motor assembly stopped | Below 1 V |