Check that the alarm notification function is not set to on.
| Result | Proceed to |
|---|---|
| The alarm notification function is not set to on. | A |
| The alarm notification function is set to on. | B |
A
B
Check for service flag.
Enter the following menus: Body Electrical / Telematics / Data List.
According to the display on the GTS, read the "Data List".
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Alarm Notification | Display "Alarm Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Tester Display |
|---|
| Alarm Notification |
Check if the flag information indicates "Available" as shown in the illustration.
| Result | Proceed to |
|---|---|
| "Enable" is indicated. | A |
| "Disable" is indicated. | B |
A
B
Check if the theft deterrent system is operating and functioning normally.
The theft deterrent system is normal.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Ask the customer to check that the reception of the cellular phone is normal.
Ask the customer to check that the call and e-mail functions of the cellular phone operate properly.
The cellular phone is normal.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Ask the customer to check that the incoming e-mail/call restriction is not set to on.
| Result | Proceed to |
|---|---|
| Incoming e-mail/call restriction is not set to on. | A |
| Incoming e-mail/call restriction is set to on. | B |
A
B