RM36D0EC _56 Audio / Visual / Telematics _083087 TELEMATICS _0402655 TELEMATICS SYSTEM J

TELEMATICS  TELEMATICS SYSTEM  Remote Starter does not Operate  


PROCEDURE

1.CHECK SMART ENTRY AND START SYSTEM (for Start Function)
a.

Check that the engine can be started by pressing the ignition switch.


Result:
Result Proceed to
Hybrid system can be started (for HV Model). A
Engine can be started (for Gasoline Model).
Hybrid system cannot be started (for HV Model). B
Engine cannot be started (for Gasoline Model).



A

2.REGISTRATION

B

2.REGISTRATION
HINT:
If registration is not performed after replacing any of the following parts, the remote engine start and stop will not be available.
·

Certification ECU (smart key ECU assembly)

·

Telephone transceiver assembly




b.

Check if the problem symptom recurs.


Result:
Result Proceed to
System does not return to normal. A
System returns to normal. B



A

3.CHECK DTC OUTPUT

B

END (COMMUNICATION ID REGISTRATION WAS NOT PERFORMED)

3.CHECK DTC OUTPUT
a.

Clear the DTCs.

Body Electrical > Power Source Control > Clear DTCs
50002 223

b.

Check for DTCs.

Body Electrical > Power Source Control > Trouble Codes
50001 223

Result:
Result Proceed to
DTCs are not output. A
DTC B228562 is output. B



A

B