ALL READINESS
With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Clear the DTCs even if no DTCs are stored.
Turn the power switch off and wait for 2 minutes or more.
Turn the power switch on (IG).
Perform the DTC judgment driving pattern to run the DTC judgment.
Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
| Tester Display |
|---|
| All Readiness |
Input the DTC to be confirmed.
Check the DTC judgment result.
| GTS Display | Description |
|---|---|
|
If the judgment result shows INCOMPLETE, perform the DTC confirmation driving pattern again. |
|
| NORMAL | ·
DTC judgment completed ·
System normal |
| ABNORMAL | ·
DTC judgment completed ·
System abnormal |
| INCOMPLETE | ·
DTC judgment not completed ·
Perform the driving pattern |
Turn the power switch off.
DIAGNOSIS RELATED INFORMATION
Check for diagnosis related information.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / Utility / Diagnosis Related Information.
| Tester Display |
|---|
| Diagnosis Related Information |
Check the Diagnosis Related Information, and then write them down.
Clear diagnosis related information.
Clearing the DTCs will also clear the diagnosis related information.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Clear the diagnosis related information and freeze frame data.
Turn the power switch off.