RM36D0EC _58 Vehicle Interior _083104 HEATING / AIR CONDITIONING _0586997 ION GENERATOR A

HEATING / AIR CONDITIONING ION GENERATOR INSTALLATION

PROCEDURE

Hide Display 88995 1.INSTALL NO. 1 ION GENERATOR BRACKET

Attach the guide and install the No. 1 ion generator bracket with the 2 screws.

Hide Display 88051A 2.INSTALL ION GENERATOR SUB-ASSEMBLY

Attach the guide and install the ion generator sub-assembly with the 3 screws.

Hide Display 88905 3.INSTALL NO. 1 AIR PURIFIER WIRE SUB-ASSEMBLY (for SFTM Made)

Connect the connector.

Attach the clamp and install the No. 1 air purifier wire sub-assembly.

Hide Display 82144 4.INSTALL NO. 4 INSTRUMENT PANEL WIRE (for GTMC Made)

HINT:: Use the same procedure described as for the No. 1 air purifier wire sub-assembly (for SFTM Made).

Hide Display 87201N 5.INSTALL AIR DUCT SUB-ASSEMBLY

Attach the guide and claw, and install the air duct sub-assembly.

Hide Display 55086 6.INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

Hide Display 55950G 7.INSTALL DEFROSTER NOZZLE ASSEMBLY

Hide Display 8.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide Display 9.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

for M20C-FKS:

for A25B-FXS:

for A25D-FXS:

for A25F-FXS:

Hide Display 10. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:: When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202405,202409,_V1,_083041,_0402304,RM100000002LTUF,202409,999999,_V1,_083041,_0402304,RM100000002NY03,

Hide Display 11. PERFORM DIAGNOSTIC SYSTEM CHECK

for GTMC Made:

for SFTM Made:

Hide Display 12.CHECK SRS WARNING LIGHT

for GTMC Made:

for SFTM Made: