SUPPLEMENTAL RESTRAINT SYSTEMS FRONT SEAT SIDE AIRBAG ASSEMBLY(for GTMC Made Power Seat) INSTALLATION
CAUTION / NOTICE / HINT
- CAUTION:
- ·
Wear protective gloves. Sharp areas on the parts may injure your hands.
·There is risk of injury.
- HINT:
- ·
Use the same procedure for the RH and LH sides.
·The procedure listed below is for the LH side.
PROCEDURE
73920A
1.INSTALL FRONT SEAT AIRBAG ASSEMBLY LH
Install the front seat airbag assembly LH with 2 new nuts.
- Torque:
- 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- CAUTION:
-
Do not reuse the nut.
Attach the wire harness clamp.
2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
3.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71862
4.INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Driver Side)
71861
5.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)
71812D
6.INSTALL FRONT SEAT CUSHION SHIELD LH (for Driver Side)
71811D
7.INSTALL FRONT SEAT CUSHION SHIELD RH (for Front Passenger Side)
71868A
8.INSTALL FRONT SEAT NO. 1 INNER CUSHION SHIELD LH
9.INSTALL FRONT SEAT ASSEMBLY LH
10. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
11. PERFORM DIAGNOSTIC SYSTEM CHECK
12.CHECK SRS WARNING LIGHT