| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| B009E84 | Right Side Restraints Sensor 5 Signal Below Allowable Range | Either condition is met:
·
Door side airbag sensor RH malfunction ·
Airbag ECU assembly malfunction |
·
Door side airbag sensor RH ·
Airbag ECU assembly |
Comes on | Not applicable |
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
When disconnecting and reconnecting the auxiliary battery
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
After replacing the airbag ECU assembly, refer to initialization.
| *1 | No. 2 Side Airbag Sensor Assembly RH |
| *2 | Door Side Airbag Sensor LH |
| *3 | Wire Harness |
Turn the ignition switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.
Interchange the door side airbag sensor RH with LH and connect the connectors.
Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in memory.
Turn the ignition switch off.
Check for DTCs.
| Proceed to |
|---|
| DTC B009E84 is output |
| DTC B009B84 is output |
| DTC B009B84 and B009E84 are not output |
Codes other than DTCs B009B84 and B009E84 may be output at this time, but they are not related to this check.
Turn the ignition switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.
Return the door side airbag sensor LH and RH to their original positions and connect the connectors.
DTC B009E84 is output
DTC B009B84 is output
DTC B009B84 and B009E84 are not output