CUSTOMIZE METER / GAUGE SYSTEM
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Warning or Display.
Select the setting by referring to the table below.
Be sure to record the current value before customizing.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Flasher Sound Volume Adjust | Function to change the flasher sound volume | Medium | $02:Large,$00:Medium,$01:Small | Combination meter assembly |
| Reverse Buzzer Setting | Function to change the reverse buzzer setting | Continual | $00:Continual,$01:Single | Combination meter assembly |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust | Function to change the ODO display time after the ignition switch is turned off | 30s | $00:30s,$01:60s,$02:600s,$03:OFF | Combination meter assembly |