SEAT POWER SEAT SWITCH(for SFTM Made) INSTALLATION
CAUTION / NOTICE / HINT
- CAUTION:
- ·
Wear protective gloves. Sharp areas on the parts may injure your hands.
·There is risk of injury.
- HINT:
- ·
Use the same procedure for the RH and LH sides.
·The following procedure is for the LH side.
PROCEDURE
84922C
1.INSTALL FRONT POWER SEAT SWITCH LH
Attach the guide.
Install the front power seat switch LH with the 3 screws.
84921D
2.INSTALL RECLINING POWER SEAT SWITCH KNOB
84921K
3.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
71812D
4.INSTALL FRONT SEAT CUSHION SHIELD LH
71868A
5.INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH
6.INSTALL FRONT SEAT ASSEMBLY LH
7. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
8. PERFORM DIAGNOSTIC SYSTEM CHECK
9.CHECK SRS WARNING LIGHT
10.INSPECT SEAT BELT WARNING SYSTEM
11.INSPECT FRONT POWER SEAT CONTROL SYSTEM
12.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)