DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Air Conditioner / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Front Left Seat Heat Sensor | LH side front seat heater temperature | 0 to 655.35kohm | ·
HI: 2.66 to 3.22kohm ·
MID: 5.43 to 5.67kohm ·
LO: 7.02 to 7.33kohm |
for HI/MID/LO Type Seat Heater* |
| Front Right Seat Heat Sensor | RH side front seat heater temperature | 0 to 655.35kohm | ·
HI: 2.66 to 3.22kohm ·
MID: 5.43 to 5.67kohm ·
LO: 7.02 to 7.33kohm |
for HI/MID/LO Type Seat Heater* |
| Front Right Seat Heater | RH side front seat heater condition | OFF/ON | OFF: RH side front seat heater does not operate
ON: RH side front seat heater operates |
for HI/MID/LO Type Seat Heater* |
| Front Left Seat Heater | LH side front seat heater condition | OFF/ON | OFF: LH side front seat heater does not operate
ON: LH side front seat heater operates |
for HI/MID/LO Type Seat Heater* |
*: Not displayed on HI/LO type front seat heater
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Air Conditioner / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Front Right Seat Heater | RH side front seat heater operation | OFF/ON | for HI/MID/LO Type Seat Heater* |
| Front Left Seat Heater | LH side front seat heater operation | OFF/ON | for HI/MID/LO Type Seat Heater* |
*: Not displayed on HI/LO type front seat heater