EXTERIOR PANELS / TRIM FRONT BUMPER(for Type B) REASSEMBLY

Hide Display 52103C 1.INSTALL FRONT BUMPER EXTENSION SUB-ASSEMBLY LH

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Type A)>REASSEMBLY202304,999999,_59,_083111,_0400751,RM1000000029RQS_01_0482,

Hide Display 52102F 2.INSTALL FRONT BUMPER EXTENSION SUB-ASSEMBLY RH

HINT:: Use the same procedure described for the LH side.

Hide Display 52618 3.INSTALL FRONT BUMPER LOWER ABSORBER (for HV Model)

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Type A)>REASSEMBLY202304,999999,_59,_083111,_0400751,RM1000000029RQS_01_0476,

Hide Display 52618 4.INSTALL FRONT BUMPER LOWER ABSORBER (for Gasoline Model)

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Type A)>REASSEMBLY202304,999999,_59,_083111,_0400751,RM1000000029RQS_01_0477,

Hide Display 51441 5.INSTALL NO. 1 ENGINE UNDER COVER

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Type A)>REASSEMBLY202304,999999,_59,_083111,_0400751,RM1000000029RQS_01_0478,

Hide Display 52132A 6.INSTALL FRONT BUMPER NO. 2 REINFORCEMENT (for HV Model)

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Type A)>REASSEMBLY202304,999999,_59,_083111,_0400751,RM1000000029RQS_01_0479,

Hide Display 52021 7.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Type A)>REASSEMBLY202304,999999,_59,_083111,_0400751,RM1000000029RQS_01_0480,

Hide Display 52614 8.INSTALL FRONT BUMPER NO. 2 ENERGY ABSORBER

a.

0,0 0,0 false

Install in this Direction

Attach the guide and install the front bumper No. 2 energy absorber.

Hide Display 52536 9.INSTALL FRONT BUMPER SIDE RETAINER LH

a.

0,0 0,0 false

	Install in this Direction
	Bolt
	Screw

Attach the claw to install the front bumper side retainer LH as shown in the illustration.

b.

Install the screw.

c.

Install the bolt.

Hide Display 52535 10.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:: Use the same procedure described for the LH side.

Hide Display 11.INSTALL ULTRASONIC SENSOR

HINT:: When installing the ultrasonic sensor clip, heat the front bumper cover using a heat light.

Standard Value:

Part	Temperature
Front Bumper Cover	20 to 30°C (68 to 86°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.

a.

When reusing the front bumper cover:

i.

Using a heat light, heat the front bumper cover surface.

ii.

Remove any remaining double-sided tape from the front bumper cover.

iii.

Wipe off any tape adhesive residue with cleaner.

NOTICE:: ·

Installing the ultrasonic sensor clip with any double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.

·

Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.

·

Also, clean the surface of the new front bumper cover.

b.

Apply primer to the front bumper cover on the installation area of the ultrasonic sensor clip using a brush or felt.

4.104,2.979 4.375,2.854 true 4.417,2.75 4.573,2.948 0.156,0.198 10 true *a

*a	Mark-off Line	-	-
	Primer Application	-	-

NOTICE:: ·

Replace the brush or felt if it is dirty or has become hardened.

·

Keep any painted surface free from primer.

·

If the primer contacts a painted surface, it may leave light primer marks. Therefore, use protective tape when using liquid primer.

·

Do not touch surfaces to which primer has been applied until the ultrasonic sensor clip has been attached.

c.

Let the primer dry sufficiently.

NOTICE:: Do not touch applied surfaces until the primer is dry.

Recommended drying time:: 10 minutes or more (at 23°C (73°F))

d.

Remove the release paper of the new ultrasonic sensor clip trying not to touch the adhesional surface.

e.

Install the 3 ultrasonic sensor clips in the positions shown in the illustration.

HINT:: Press the ultrasonic sensor clips firmly to install them.

4.073,2.969 4.427,2.802 true 4.448,2.708 4.625,2.906 0.177,0.198 10 true *a

*a

Mark-off Line

-

Hide Display 53112E 12.INSTALL LOWER NO. 1 RADIATOR GRILLE

a.

0,0 0,0 false

Install in this Direction

Attach the claw and guide to install the lower No. 1 radiator grille as shown in the illustration.

Hide Display 52411 13.INSTALL FRONT BUMPER GUARD

a.

Attach the claw and guide to install the front bumper guard as shown in the illustration.

0,0 0,0 false

Install in this Direction

-

b.

Install the 6 outside moulding retainers.

c.

Install the 2 screws.

Hide Display 52711 14.INSTALL FRONT BUMPER MOULDING

a.

0,0 0,0 false

Install in this Direction

Attach the claw and install the front bumper moulding.

b.

Install the 2 screws.

Hide Display 16695B 15.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE LH

a.

Attach the claw and install the front radiator side air guide plate LH.

Hide Display 16691B 16.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE RH

HINT:: Use the same procedure described for the LH side.

Hide Display 53286C 17.INSTALL FRONT BUMPER ARM HOLE COVER LH

a.

0,0 0,0 false

Fall Prevention Hook

Connect the fall prevention hook as shown in the illustration.

b.

0,0 0,0 false

Install in this Direction

Attach the claw and guide and install the front bumper arm hole cover LH as shown in the illustration.

Hide Display 53285J 18.INSTALL FRONT BUMPER ARM HOLE COVER RH

HINT:: Use the same procedure described for the LH side.

Hide Display 75311 19.INSTALL RADIATOR GRILLE EMBLEM

a.

0,0 0,0 false

Install in this Direction

Attach the claw and guide to install the radiator grille emblem as shown in the illustration.

b.

Install the screw.

Hide Display 52128B 20.INSTALL FRONT BUMPER HOLE COVER LH

a.

0,0 0,0 false

Install in this Direction

Attach the claw and install the front bumper hole cover LH as shown in the illustration.

Hide Display 52127D 21.INSTALL FRONT BUMPER HOLE COVER RH

HINT:: Use the same procedure described for the LH side.

Hide Display 53124B 22.INSTALL SIDE RADIATOR GRILLE MOULDING LH

a.

0,0 0,0 false

Install in this Direction

Attach the claw and install the side radiator grille moulding LH as shown in the illustration.

Hide Display 53123B 23.INSTALL SIDE RADIATOR GRILLE MOULDING RH

HINT:: Use the same procedure described for the LH side.

Hide Display 53115B 24.INSTALL RADIATOR GRILLE BRACKET

a.

0,0 0,0 false

Install in this Direction

Attach the claw and install the radiator grille bracket as shown in the illustration.

b.

Install the 6 screws.

c.

0,0 0,0 false

	Screw
	Clip (A)
	Clip (B)

Attach the guide and install the 2 clips (B).

d.

Install the 4 clips (A).

e.

Install the 2 screws.

Hide Display 53395E 25.INSTALL FRONT HOOD TO END PANEL SEAL

a.

0,0 0,0 false

Install in this Direction

Attach the clip and install the front hood to end panel seal as shown in the illustration.

b.

Attach the guide.

Hide Display 81220 26.INSTALL FOG LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>FOG LIGHT ASSEMBLY (for LED Fog Light)>REMOVAL202304,999999,_59,_083096,_0419112,RM1000000029SWQ_02_0002,

Hide Display 81210A 27.INSTALL FOG LIGHT ASSEMBLY RH

HINT:: Use the same procedure described for the LH side.

Hide Display 28.INSTALL NUT

a.

0,0 0,0 false

Install in this Direction

Install the 2 nuts as shown in the illustration.

Hide Display 88211B 29.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>INSTALLATION202304,999999,_51,_083055,_0401007,RM1000000029L6M_04_0001,

Hide Display 86790B 30.INSTALL FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TELEVISION CAMERA (for Front)>INSTALLATION202304,999999,_56,_083082,_0403106,RM1000000029RT7_01_0001,

Hide Display 89341L 31.INSTALL FRONT CENTER ULTRASONIC SENSOR

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Front)>INSTALLATION202405,202409,_56,_083082,_0403104,RM100000002KYQR_01_0067,202409,999999,_56,_083082,_0403104,RM100000002NTZS_01_0067,

Hide Display 89341K 32.INSTALL FRONT CORNER ULTRASONIC SENSOR

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Front)>INSTALLATION202405,202409,_56,_083082,_0403104,RM100000002KYQR_01_0069,202409,999999,_56,_083082,_0403104,RM100000002NTZS_01_0069,

Hide Display 82114 33.INSTALL NO. 4 ENGINE ROOM WIRE

a.

Connect each connector.

3.479,1.792 3.708,1.99 0.229,0.198 12 true *A

*A

w/ Panoramic View Monitor System

-

b.

Attach the clamp and install the No. 4 engine room wire.

EXTERIOR PANELS / TRIM FRONT BUMPER(for Type B) REASSEMBLY

PROCEDURE