RM36D0EC
_56
Audio / Visual / Telematics
_083086
AUDIO / VIDEO
_0593011
AUDIO AND VISUAL SYSTEM
J
AUDIO / VIDEO AUDIO AND VISUAL SYSTEM Sound cannot be Heard Sound Quality is Poor only when Replaying USB Storage Device
WIRING DIAGRAM
1.344,0.5 1.521,0.677
0.177,0.177
10
false
2
0.865,1.427 1.313,1.625
0.448,0.198
10
false
UDO+
0.906,2.177 1.313,2.365
0.406,0.188
10
false
UJSS
5.906,2.188 6.313,2.365
0.406,0.177
10
false
USG1
5.906,1.438 6.344,1.615
0.438,0.177
10
false
US1+
5.906,0.646 6.281,0.854
0.375,0.208
10
false
US1-
0.073,2.604 0.708,2.844
0.635,0.24
10
false
G160
0.094,2.771 2.396,2.99
2.302,0.219
10
false
No. 1 Stereo Jack Adapter Assembly
2.458,3.281 4.135,3.469
1.677,0.188
10
false
: USB Communication Line
3.552,1.729 3.719,1.896
0.167,0.167
10
false
*
5.417,2.521 6.052,2.75
0.635,0.229
10
false
G161
5.427,2.677 7.125,3.031
1.698,0.354
10
false
Radio and Display Receiver Assembly
5.729,0.542 5.906,0.719
0.177,0.177
10
false
2
1.333,1.323 1.51,1.5
0.177,0.177
10
false
3
1.354,2.094 1.531,2.271
0.177,0.177
10
false
5
5.75,2.115 5.927,2.292
0.177,0.177
10
false
5
5.74,1.323 5.917,1.5
0.177,0.177
10
false
3
0.906,0.635 1.302,0.854
0.396,0.219
10
false
UDO-
0.281,3.281 1.125,3.51
0.844,0.229
10
false
*: Shielded
CAUTION / NOTICE / HINT
- NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.
PROCEDURE
1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.
Disconnect the G161 radio and display receiver assembly connector.
b.
Disconnect the G160 No. 1 stereo jack adapter assembly connector.
c.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition G161-2 (US1-) - G160-2 (UDO-) Always Below 1 Ω G161-3 (US1+) - G160-3 (UDO+) Always Below 1 Ω G161-5 (USG1) - G160-5 (UJSS) Always Below 1 Ω G161-2 (US1-) or G160-2 (UDO-) - Body ground Always 10 kΩ or higher G161-3 (US1+) or G160-3 (UDO+) - Body ground Always 10 kΩ or higher G161-5 (USG1) or G160-5 (UJSS) - Body ground Always 10 kΩ or higher
- Result:
Proceed to OK NG
OK
2.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
2.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
a.
Replace the No. 1 stereo jack adapter assembly with a new or known good one.
b.
Check if the problem symptom recurs.
- Result:
Result Proceed to Malfunction disappears A Malfunction occurs B
A
END (NO. 1 STEREO JACK ADAPTER ASSEMBLY IS DEFECTIVE)
B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY