PARKING BRAKE ELECTRIC PARKING BRAKE ACTUATOR ON-VEHICLE INSPECTION
PROCEDURE
46310B
1.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY (for Gasoline Model)
With the ignition switch ON and the wheels not contacting the ground, operate the electric parking brake switch (integration control and panel assembly) to check the condition of the rear wheels when the electric parking brake is operating and not operating.
| Assembly Status | Condition of Rear Wheels |
|---|---|
| Lock | Rear wheels cannot be rotated |
| Release | Rear wheels can be rotated |
Pull the electric parking brake switch (integration control and panel assembly) to the lock side for approximately 1 second and check that the parking brake indicator light (red) turns on.
Push the electric parking brake switch (integration control and panel assembly) to the release side for approximately 1 second and check that the parking brake indicator light (red) turns off.
At this time, check that the brake warning light / yellow (minor malfunction) does not turn on.
46310A
2.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY (for HV Model)
With the ignition switch ON and the wheels not contacting the ground, operate the electric parking brake switch (integration control and panel assembly) to check the condition of the rear wheels when the electric parking brake isoperating and not operating.
| Assembly Status | Condition of Rear Wheels |
|---|---|
| Lock | Rear wheels cannot be rotated |
| Release | Rear wheels can be rotated |
Pull the electric parking brake switch (integration control and panel assembly) to the lock side for approximately 1 second and check that the parking brake indicator light (red) turns on.
Push the electric parking brake switch (integration control and panel assembly) to the release side for approximately 1 second and check that the parking brake indicator light (red) turns off.
At this time, check that the brake warning light / yellow (minor malfunction) does not turn on.