RM36D0EC _52 Drivetrain _083071 AXLE AND DIFFERENTIAL _0403014 REAR AXLE HUB A

AXLE AND DIFFERENTIAL REAR AXLE HUB INSTALLATION

CAUTION / NOTICE / HINT

HINT:: ·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.

PROCEDURE

Hide Display 42450B 1.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH (for 2WD)

Install the rear axle hub and bearing assembly and rear disc brake dust cover sub-assembly to the rear axle carrier sub-assembly with the 4 bolts.

Torque:: 90 N*m (918 kgf*cm, 66 ft.*lbf)

Hide Display 42450B 2.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH (for AWD)

2.5,1.917 2.5,1.021 2.5,1.021 2.854,1.021 true 2.5,1.313 2.917,1.313 true 2.448,1.938 2.781,2.146 0.333,0.208 10 false *a

Matchmark

Align the matchmarks on the rear drive shaft assembly and rear axle hub and bearing assembly.

NOTICE:: Be careful not to damage the thread portion of the rear drive shaft assembly.

Install the rear axle hub sub-assembly and rear disc brake dust cover to the rear axle carrier with the 4 bolts.

Torque:: 90 N*m (918 kgf*cm, 66 ft.*lbf)

NOTICE:: Be careful not to damage the drive shaft boot.

Hide Display 42431 3.INSTALL REAR DISC (for AWD)

Click hereBrake>BRAKE (REAR)>REAR BRAKE>INSTALLATION202304,999999,_54,_083080,_0403356,RM100000002AG9Q_04_0010,

Hide Display 4.INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH (for AWD)

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE CARRIER (for AWD)>INSTALLATION202304,999999,_52,_083071,_0592351,RM100000002AFUF_01_0133,

Hide Display 42312B 5.TEMPORARILY INSTALL REAR AXLE SHAFT NUT LH (for AWD)

Clean the threaded parts on the rear drive shaft assembly and a new rear axle shaft nut using non-residue solvent.

NOTICE:: ·

Be sure to perform this work even when using a new rear drive shaft assembly.

·

Keep the threaded parts free of oil and foreign matter.

Using a 30 mm socket wrench, install the rear axle shaft nut LH.

Torque:: 216 N*m (2203 kgf*cm, 159 ft.*lbf)

NOTICE:: Stake the rear axle shaft nut LH after inspecting for looseness and runout in the following steps.

HINT:: Depress the brake pedal to prevent the drive shaft from rotating.

Hide Display 6.DISCONNECT REAR DISC BRAKE CALIPER ASSEMBLY LH (for AWD)

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE CARRIER (for AWD)>REMOVAL202304,202405,_52,_083071,_0592351,RM100000002AFUE_02_0088,202405,202409,_52,_083071,_0592351,RM100000002LVHV_02_0088,202409,999999,_52,_083071,_0592351,RM100000002NT3Q_02_0088,

Hide Display 42431 7.REMOVE REAR DISC (for AWD)

Click hereBrake>BRAKE (REAR)>REAR BRAKE>REMOVAL202304,202405,_54,_083080,_0403356,RM100000002AG9O_04_0001,202405,202409,_54,_083080,_0403356,RM100000002LS0T_04_0001,202409,999999,_54,_083080,_0403356,RM100000002N9V9_04_0001,

Hide Display 8.INSPECT REAR AXLE HUB BEARING LOOSENESS

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB>ON-VEHICLE INSPECTION202304,999999,_52,_083071,_0403014,RM100000002AFU1_01_0004,

Hide Display 9.INSPECT REAR AXLE HUB RUNOUT

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB>ON-VEHICLE INSPECTION202304,999999,_52,_083071,_0403014,RM100000002AFU1_01_0005,

Hide Display 42431 10.INSTALL REAR DISC

Click hereBrake>BRAKE (REAR)>REAR BRAKE>INSTALLATION202304,999999,_54,_083080,_0403356,RM100000002AG9Q_04_0010,

Hide Display 11.INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH

for 2WD: Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE CARRIER (for 2WD)>INSTALLATION202304,999999,_52,_083071,_0403015,RM100000002AFU5_06_0015,

for AWD: Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE CARRIER (for AWD)>INSTALLATION202304,999999,_52,_083071,_0592351,RM100000002AFUF_01_0133,

Hide Display 47319F 12.CONNECT REAR FLEXIBLE HOSE

for 2WD: Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE CARRIER (for 2WD)>INSTALLATION202304,999999,_52,_083071,_0403015,RM100000002AFU5_06_0028,

for AWD: Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE CARRIER (for AWD)>INSTALLATION202304,999999,_52,_083071,_0592351,RM100000002AFUF_01_0162,

Hide Display 42312B 13.STAKE REAR AXLE SHAFT NUT LH (for AWD)

Using a chisel and hammer, stake the rear axle shaft nut LH.

Hide Display 890C0A 14.CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY (for 2WD)

Connect the No. 2 parking brake wire assembly connector to the rear axle hub and bearing assembly.

Hide Display 89544E 15.CONNECT REAR SKID CONTROL SENSOR LH (for AWD)

Connect the rear skid control sensor LH to the rear axle carrier sub-assembly with the bolt.

Torque:: 8.5 N*m (87 kgf*cm, 75 in.*lbf)

Hide Display 890C0A 16.CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

Connect the No. 2 parking brake wire assembly connector to the parking brake actuator assembly.

Hide Display 17.INSTALL REAR WHEEL

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>INSTALLATION201910,999999,_V1,_083136,_0403660,RM100000001JU8B,

Hide Display 18.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for HV Model)

Click hereBrake>BRAKE (REAR)>REAR BRAKE>INSTALLATION202304,999999,_54,_083080,_0403356,RM100000002AG9Q_04_0038,

Hide Display 19.CHECK FOR SPEED SENSOR SIGNAL

for Gasoline Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>TEST MODE PROCEDURE202304,999999,_54,_083077,_0402316,RM100000002AG8O,

for HV Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>TEST MODE PROCEDURE202304,999999,_54,_083077,_0401811,RM1000000029TH6,

Hide Display 20. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL (for HV Model)

HINT:: When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202304,202405,_V1,_083041,_0402304,RM100000002AJ9H,202405,202409,_V1,_083041,_0402304,RM100000002LTUF,202409,999999,_V1,_083041,_0402304,RM100000002NY03,