RM36D0EC _51 Engine / Hybrid System _087038 M20C-FKS FUEL _0417290 FUEL PRESSURE SENSOR A

M20C-FKS FUEL FUEL PRESSURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.; Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION201910,999999,_V1,_083040,_0402303,RM100000001JHCH,

Hide Display 89458H 1.INSTALL NO. 2 FUEL PRESSURE SENSOR

HINT:: Perform "Inspection After Repair" after replacing the No. 2 fuel pressure sensor.; Click hereEngine / Hybrid System>M20C-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION202304,202405,_51,_087036,_0418131,RM1000000029CMT,202405,999999,_51,_087036,_0418131,RM100000002IF8T,

Install a new O-ring to the No. 2 fuel pressure sensor.

Install the No. 2 fuel pressure sensor to the fuel delivery pipe sub-assembly.

NOTICE:: ·

Do not allow dust or dirt to enter the No. 2 fuel pressure sensor.

·

If a No. 2 fuel pressure sensor is dropped or struck, replace it with a new one.

Install the No. 2 fuel pressure sensor holder to the fuel delivery pipe sub-assembly with the bolt.

Connect the connector to the No. 2 fuel pressure sensor.

Hide Display 25620 2.INSTALL EGR VALVE ASSEMBLY

Hide Display 3.INSPECT FOR FUEL LEAK

Hide Display 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide Display 5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:: When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202304,202405,_V1,_083041,_0402304,RM100000002AJ9H,202405,202409,_V1,_083041,_0402304,RM100000002LTUF,202409,999999,_V1,_083041,_0402304,RM100000002NY03,

Hide Display 6.PERFORM INITIALIZATION

Perform "Inspection After Repair" after replacing the No. 2 fuel pressure sensor.