RM36D0EC
_51
Engine / Hybrid System
_083055
CRUISE CONTROL
_0403826
LANE TRACING ASSIST SYSTEM
U
CRUISE CONTROL LANE TRACING ASSIST SYSTEM TERMINALS OF ECU
CHECK FORWARD RECOGNITION CAMERA
- NOTICE:
- ·
DTCs may be detected when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.
·Do not apply unnecessary loads as the connector may be damaged.
2.083,0.76 2.583,1
0.5,0.24
2.229,0.802 2.688,1
0.458,0.198
10
false
P8
a.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| P8-7 (IGB) - Body ground | P - Body ground | Power source | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| P8-3 (LKSW) - P8-10 (GND) | R - W-B | Steering pad switch signal | Ignition switch off, LTA main switch off | 1 MΩ or higher |
| Ignition switch off, LTA main switch on | 228 to 252 Ω | |||
| P8-10 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |