RM36D0EC _56 Audio / Visual / Telematics _087044 NAVIGATION / MULTI INFO DISPLAY _0588257 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Sound cannot be Heard Sound Quality is Poor only when Replaying USB Storage Device  


WIRING DIAGRAM

E429903E27
1.344,0.5 1.521,0.677 0.177,0.177 10 false 2 0.865,1.427 1.313,1.625 0.448,0.198 10 false UDO+ 0.906,2.177 1.313,2.365 0.406,0.188 10 false UJSS 5.906,2.188 6.313,2.365 0.406,0.177 10 false USG1 5.906,1.438 6.344,1.615 0.438,0.177 10 false US1+ 5.906,0.646 6.281,0.854 0.375,0.208 10 false US1- 0.458,2.646 1.094,2.885 0.635,0.24 10 false G160 0.448,2.781 2.75,3 2.302,0.219 10 false No. 1 Stereo Jack Adapter Assembly 2.458,3.25 4.135,3.438 1.677,0.188 10 false : USB Communication Line 3.552,1.729 3.719,1.896 0.167,0.167 10 false * 5.833,2.625 6.469,2.854 0.635,0.229 10 false G161 5.833,2.781 7.052,3.167 1.219,0.385 10 false Navigation Receiver Assembly 5.729,0.542 5.906,0.719 0.177,0.177 10 false 2 1.333,1.323 1.51,1.5 0.177,0.177 10 false 3 1.354,2.094 1.531,2.271 0.177,0.177 10 false 5 5.75,2.115 5.927,2.292 0.177,0.177 10 false 5 5.74,1.323 5.917,1.5 0.177,0.177 10 false 3 0.906,0.635 1.302,0.854 0.396,0.219 10 false UDO- 0.281,3.281 1.125,3.51 0.844,0.229 10 false *: Shielded

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the G161 navigation receiver assembly connector.


b.

Disconnect the G160 No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G161-2 (US1-) - G160-2 (UDO-) Always Below 1 Ω
G161-3 (US1+) - G160-3 (UDO+) Always Below 1 Ω
G161-5 (USG1) - G160-5 (UJSS) Always Below 1 Ω
G161-2 (US1-) or G160-2 (UDO-) - Body ground Always 10 kΩ or higher
G161-3 (US1+) or G160-3 (UDO+) - Body ground Always 10 kΩ or higher
G161-5 (USG1) or G160-5 (UJSS) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
a.

Replace the No. 1 stereo jack adapter assembly with a new or known good one.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>STEREO JACK ADAPTER ASSEMBLY>REMOVAL


b.

Check if the problem symptom recurs.


Result:
Result Proceed to
Malfunction disappears A
Malfunction occurs B



A

END (NO. 1 STEREO JACK ADAPTER ASSEMBLY IS DEFECTIVE)

B