CHECK SERVICE FLAG INFORMATION
This function checks the service use conditions of the vehicle.
Check the service flag information.
In accordance with the display of the GTS, display the "Service Flag Information" screen.
| Tester Display |
|---|
| Service Flag Information Reading |
Check the service flag information.
CONNECTION HISTORY INITIALIZATION
This function initializes the connected device history.
Connection history initialization
In accordance with the display of the GTS, display the "Connection History Initialization" screen.
| Tester Display |
|---|
| Connection History Initialization |
Perform connection history initialization.
MAP INFORMATION
This function is used to check the map version of the navigation system and the end date of the map update service.
Check map information.
In accordance with the display of the GTS, display the "Map Information" screen.
| Tester Display |
|---|
| Map Information |
Check the map version and the end date of the map update service.
NAVI SCREEN UNLOCK
This function can be used to release the security lock if the security lock password is forgotten.
Release the security lock using the GTS (Navi Screen Unlock)
According to the display on the GTS, display the Navi Screen Unlock screen.
| Tester Display |
|---|
| Navi Screen Unlock |
According to the display on the GTS, release the security lock.
Refer to Service Bulletin.
CHECK VIDEO DEVICE CONNECTION CHECK
This function is used to detect disconnection of the video devices.
Check Video Device Connection Check.
In accordance with the display of the GTS, display the "Video Device Connection Check" screen.
| Tester Display |
|---|
| Video Device Connection Check |
In accordance with the display of the GTS, perform the video device connection check.
| Error Detected Image Line (Type) | Areas to be Checked |
|---|---|
| H/U - > Separate Display (GVIF) | - |
| H/U - > Full RSE (GVIF) | - |
| RSE - > Seatback Display RH (GVIF) | - |
| RSE - > Seatback Display LH (GVIF) | - |
DTCs are stored when errors are detected.
Depending on the vehicle, some of the items will not be displayed on the "Error Detected Image Line (Type)" screen.
Clear video device connection check.
When DTCs are cleared using any of the following operations, Video Device Connection Check will be cleared as well.
Cleared using the GTS.
Cleared using the system check mode screen.
Cleared using the unit check mode screen.
CHECK ALL READINESS
Whether the DTC judgement has completed can be checked using the GTS.
This function can be used to confirm whether the DTC judgement has completed after a reproduction test for a DTC or after completing repairs.
Using the GTS, clear the DTCs.
Even if no DTCs are stored, perform the Clear DTCs procedure as there may be pending DTCs.
Turn the ignition switch off and wait for 120 seconds.
Turn the ignition switch to ON and wait for 180 seconds.
Perform the DTC judgement driving pattern to run the DTC judgement.
Using the GTS, perform All Readiness.
| Tester Display |
|---|
| All Readiness |
Proceed to the next screen and enter the DTC to be checked.
Check the status of the All Readiness check.
| Result | Content |
|---|---|
| NORMAL | ·
All readiness check completed ·
System normal |
| ABNORMAL | ·
All readiness check completed ·
System malfunction |
| INCOMPLETE | ·
All readiness check not completed ·
After confirming the detection conditions, perform a road test |
| N/A | ·
All readiness check cannot be performed ·
Number of DTCs that can be stored by the ECU for which the prerequisite conditions have not been met has been reached ·
After confirming the detection conditions, perform a road test |
If the judgment result shows INCOMPLETE or N/A, perform the DTC judgement driving pattern and then recheck the judgment result.
Turn the ignition switch off.