RM36D0EC _59 Vehicle Exterior _083108 SLIDING ROOF / CONVERTIBLE _0400986 SLIDING ROOF SWITCH ASSEMBLY G

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SWITCH ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81208 1.INSPECT MAP LIGHT SUB-ASSEMBLY (for Panoramic Moon Roof)

a.

Check the sliding roof switch (map light sub-assembly).

i.
E417024C14
0.813,1.781 1.229,1.365 true 2.448,1.781 2.031,1.365 true 2.094,1.781 1.844,1.365 true 1.167,1.792 1.417,1.375 true 1.625,1.781 1.625,1.365 true 3.156,1.802 2.74,1.385 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 0.729,1.802 1.094,2.104 0.365,0.302 10 false B 1.104,1.823 1.469,2.125 0.365,0.302 10 false UP 1.448,1.823 2.063,2.094 0.615,0.271 10 false DOWN 2,1.823 2.365,2.125 0.365,0.302 10 false OPN 2.396,1.813 2.76,2.115 0.365,0.302 10 false CLS 3.083,1.823 3.396,2.115 0.313,0.292 10 false GND
*a Component without harness connected
(Sliding Roof Switch (Map Light Sub-assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
13 (GND) - 18 (OPN) OPEN switch ON 100 Ω or less
OPEN switch OFF 10 kΩ or higher
13 (GND) - 17 (CLS) CLOSE switch ON 100 Ω or less
CLOSE switch OFF 10 kΩ or higher
13 (GND) - 20 (UP) Roof sunshade OPEN switch ON 100 Ω or less
Roof sunshade OPEN switch OFF 10 kΩ or higher
13 (GND) - 19 (DOWN) Roof sunshade CLOSE switch ON 100 Ω or less
Roof sunshade CLOSE switch OFF 10 kΩ or higher
13 (GND) - 21 (B) Tilt switch ON 100 Ω or less
Tilt switch OFF 10 kΩ or higher


If the result is not as specified, replace the sliding roof switch (map light sub-assembly).



Hide 81208 2.INSPECT MAP LIGHT SUB-ASSEMBLY (for Moon Roof)

a.

Check the sliding roof switch (map light sub-assembly).

i.
E417024C13
2.458,1.771 2.042,1.354 true 2.073,1.771 1.823,1.354 true 1.146,1.781 1.396,1.365 true 1.604,1.781 1.604,1.365 true 3.156,1.771 2.74,1.354 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 1.031,1.813 1.396,2.115 0.365,0.302 10 false UP 1.438,1.813 1.969,2.146 0.531,0.333 10 false DOWN 1.969,1.802 2.333,2.104 0.365,0.302 10 false OPN 2.427,1.792 2.792,2.094 0.365,0.302 10 false CLS 3.104,1.792 3.417,2.083 0.313,0.292 10 false GND
*a Component without harness connected
(Sliding Roof Switch (Map Light Sub-assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
13 (GND) - 18 (OPN) OPEN switch ON 100 Ω or less
OPEN switch OFF 10 kΩ or higher
13 (GND) - 17 (CLS) CLOSE switch ON 100 Ω or less
CLOSE switch OFF 10 kΩ or higher
13 (GND) - 20 (UP) UP switch ON 100 Ω or less
UP switch OFF 10 kΩ or higher
13 (GND) - 19 (DOWN) DOWN switch ON 100 Ω or less
DOWN switch OFF 10 kΩ or higher


If the result is not as specified, replace the sliding roof switch (map light sub-assembly).