RM36D0EC _59 Vehicle Exterior _083107 WINDOW / GLASS _0400962 FRONT PASSENGER SIDE POWER WINDOW SWITCH G

WINDOW / GLASS FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION

PROCEDURE

Hide Display 84810 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

0.76,2.24 1.135,1.969 true 1.135,2.292 1.333,1.979 true 1.5,2.313 1.625,1.979 true 1.802,2.333 1.802,1.979 true 0.135,0.135 0.448,0.333 0.313,0.198 10 false *a 0.448,2.292 0.948,2.531 0.5,0.24 10 false AUTO 1.396,2.354 1.896,2.594 0.5,0.24 10 false UP 0.979,2.323 1.479,2.563 0.5,0.24 10 false GND 1.698,2.375 2.198,2.615 0.5,0.24 10 false DOWN

*a	Component without harness connected (Power Window Regulator Switch Assembly)

Inspect the power window regulator switch assembly.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
5 (UP) - 7 (GND)	UP (MANUAL) → OFF	Below 1 Ω → 10 kΩ or higher
4 (DOWN) - 7 (GND)	DOWN (MANUAL) → OFF	Below 1 Ω → 10 kΩ or higher
5 (UP) - 7 (GND) 5 (UP) - 8 (AUTO)	UP (AUTO) → OFF	Below 1 Ω → 10 kΩ or higher
4 (DOWN) - 7 (GND) 8 (AUTO) - 7 (GND)	DOWN (AUTO) → OFF	Below 1 Ω → 10 kΩ or higher

If the result is not as specified, replace the power window regulator switch assembly.

w/ illumination:

Check that the LED illumination.

1.688,2.448 1.896,1.99 true 2.583,2.406 2.292,1.99 true 0.135,0.135 0.448,0.333 0.313,0.198 10 false *a 1.552,2.51 2.052,2.75 0.5,0.24 10 false ILL+ 2.521,2.49 3.021,2.729 0.5,0.24 10 false ILL-

*a	Component without harness connected (Power Window Regulator Switch Assembly)

Apply auxiliary battery voltage to the power window regulator switch assembly and check that the LED illuminates.

OK:

Auxiliary Battery Connection	Specified Condition
Auxiliary battery positive (+) → 3 (ILL+) Auxiliary battery negative (-) → 1 (ILL-)	LED illuminates

If the result is not as specified, replace the power window regulator switch assembly.