SEAT  FRONT SEAT ASSEMBLY(for GTMC Made Power Seat)  REASSEMBLY  

Connect the No. 1 terminal of the slide motor to the positive (+) auxiliary battery terminal, and the No. 2 terminal to the negative (-) auxiliary battery terminal and then move the front seat adjuster assembly LH to the rearmost position.

0,0 0,0 false

Install in this Direction

Attach the claw and install the front seat rear upper track cover LH.

Connect the No. 1 terminal of the slide motor to the positive (+) auxiliary battery terminal, and the No. 2 terminal to the negative (-) auxiliary battery terminal and then move the front seat adjuster assembly RH to the rearmost position.

0,0 0,0 false

Install in this Direction

Attach the claw and install the front seat rear upper track cover RH.

Connect the No. 2 terminal of the slide motor to the positive (+) auxiliary battery terminal, and the No. 1 terminal to the negative (-) auxiliary battery terminal and then move the front seat adjuster assembly LH to the frontmost position.

0,0 0,0 false

Install in this Direction

Attach the claw and install the seat upper track rail cover LH.

Connect the No. 2 terminal of the slide motor to the positive (+) auxiliary battery terminal, and the No. 1 terminal to the negative (-) auxiliary battery terminal and then move the front seat adjuster assembly RH to the frontmost position.

0,0 0,0 false

Install in this Direction

Attach the claw and install the seat upper track rail cover RH.

Connect the No. 1 terminal of the slide motor to the positive (+) auxiliary battery terminal, and the No. 2 terminal to the negative (-) auxiliary battery terminal and then return the front seat adjuster assembly RH to the center position as the matchmark.

0,0 0,0 false

Install in this Direction

Push in the installation direction shown in the illustration to attach the guide and claw and install the front seat lower cushion shield.

1.625,2.24 1.625,1.51 1.625,1.51 2.146,1.51 true 1.542,2.25 1.854,2.406 0.313,0.156 10 false *a

*a	Above the front seat cushion wire harness holder LH

Attach the claw and clamp and install the front seat wire LH.

NOTICE:

·

Attach the claw first.

·

Pass the wire harness indicated in the illustration above the front seat cushion wire harness holder LH.

0,0 0,0 false

Install in this Direction

Attach the claw and install the seat heater control sub-assembly LH.

Slide in the installation direction shown in the illustration to attach the hook and claw.

0.927,0.438 1.417,0.563 true 2.479,1.635 2.844,2.156 true 0.729,0.313 0.906,0.51 0.177,0.198 10 false *a 2.854,2.167 3.167,2.323 0.313,0.156 10 false *b

*a	Hook	*b	Guide
	Install in this Direction	-	-

Attach the clamp.

0,0 0,0 false

Install in this Direction

Attach the claw and install the seat heater control sub-assembly RH as shown in the illustration.

Attach the guide and install the front seat cushion wire harness holder RH with the 2 screws.

Attach the claw and clamp to install the front seat wire RH.

2.167,0.906 2.365,0.396 2.365,0.396 2.563,0.396 true 2.708,1.313 2.844,1.146 2.844,1.146 3.073,1.146 true 2.427,1.896 3.031,2.771 3.031,2.771 2.521,1.594 true 0.771,1.719 0.583,0.969 0.583,0.969 0.385,0.969 true 1.146,2.125 1.146,2.854 1.146,2.854 2.052,2.854 true 1.313,2.854 1.313,2.229 true 1.76,2.854 1.76,2.594 true 3.01,2.792 3.219,3 0.208,0.208 10 false *a 2.594,0.292 2.906,0.448 0.313,0.156 10 false *b 3.094,1.042 3.354,1.24 0.26,0.198 10 false *b 0.188,0.875 0.365,1.073 0.177,0.198 10 false *b 2.063,2.76 2.25,2.948 0.188,0.188 10 true *b

*a	Clamp
*b	Hook
	Install in this Direction (1)
	Install in this Direction (2)

Attach the hook on the rear side of the front seat cushion spring sub-assembly LH in the installation direction (1) shown in the illustration.

Attach the hook and install the seat cushion climate blower sub-assembly LH.

Connect the connector and attach the clamp.

0.469,0.677 1.125,0.875 true 0.479,1.99 1.104,1.99 true 0.26,1.885 0.458,2.115 0.198,0.229 10 false *b 0.26,0.542 0.458,0.76 0.198,0.219 10 false *a

*a	Hook
*b	Guide
	Install in this Direction

Attach the guide as shown in the illustration.

1.396,1.531 1.938,1.729 true 1.25,2.646 0.906,3.094 true 1.969,1.677 2.281,1.833 0.313,0.156 10 false *a 0.76,3.104 1.073,3.26 0.313,0.156 10 false *b

*a	Hook
*b	Guide
	Install in this Direction

Attach the guide as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the hook and claw and install the LH seat reclining adjuster inside cover LH as shown in the illustration.

3.177,1.885 3.063,0.917 true 0.667,2.771 1.406,2.677 true 3.115,1.906 3.427,2.063 0.313,0.156 10 false *a 0.458,2.677 0.656,2.885 0.198,0.208 10 true *b

*a	Guide
*b	Hook
	Install in this Direction

Attach the hook, guide and claw and install the LH seat reclining adjuster inside cover RH as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the hook and claw to install the RH seat reclining adjuster inside cover LH as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the hook and claw to install the RH seat reclining adjuster inside cover RH as shown in the illustration.

Attach the clamp and claw.

Attach the hook and install the separate type front seat cushion cover to the separate type front seat cushion pad.

NOTICE:

Be careful not to dirty or damage the separate type front seat cushion cover.

0.917,1.844 1.688,1.604 true 0.708,1.771 1.021,1.969 0.313,0.198 10 false *a

*a	Band
	Install in this Direction

Attach the band.

Attach the claw to install the connector holder.

Attach the hook and install the separate type front seat cushion cover with pad.

for Front Passenger Side:

i.

Attach the claw.

w/ Climate Control Seat System:

i.

Connect the connector and attach the clamp.

Attach the claw and install the 2 new front No. 2 seatback hooks.

NOTICE:

Check that the claw of the front No. 2 seatback hook are securely attached.

Attach the claw and install the 2 front seatback edge protectors.

Attach the hook and claw and install the seatback climate control blower LH.

0,0 0,0 false

Install in this Direction

Install the front seatback felt LH.

0,0 0,0 false

Install in this Direction

Set the lumbar support adjuster assembly LH to the front seatback frame sub-assembly LH in the installation direction shown in the illustration.

2.833,1.573 2.146,1.229 true 2.563,1.042 2.823,1.26 0.26,0.219 12 true *A 2.865,1.5 3.125,1.719 0.26,0.219 12 true *A

*A	w/ Climate Control Seat System

Attach the clamp and install the front No. 2 seat wire LH.

2.177,2.115 2.865,2.208 true 2.479,1.5 2.75,1.771 0.271,0.271 12 true *A 2.906,2.115 3.177,2.385 0.271,0.271 12 false *A

*A	w/ Climate Control Seat System

Attach the clamp and install the front No. 2 seat wire RH.

Attach the hook and install the separate type front seatback cover to the separate type front seatback pad.

NOTICE:

Be careful not to dirty or damage the separate type front seatback cover.

0,0 0,0 false

Install in this Direction

Attach the claw and install the 2 front seat headrest supports as shown in the illustration.

Close the 2 fasteners.

w/ Climate Control Seat System:

i.

Attach the clamp.

0.792,1.177 1.76,1.729 true 1.792,1.677 2.104,1.833 0.313,0.156 10 false *a

*a

Outshoot

Attach the hook.

NOTICE:

·

Be careful not to overlap on the route of the wire harness.

·

Pass the wire harness through the outside of the outshoot.

Attach the guide.

Temporarily install the separate type front seatback assembly with the 4 bolts.

Attach the hook.

0.333,2.802 1.313,2.479 true 0.844,1.979 1.104,2.208 0.26,0.229 12 true *A 0.094,2.698 0.333,2.906 0.24,0.208 12 true *A

*A	w/ Climate Control Seat System:

Attach the claw.

Attach the band.

0,0 0,0 false

Install in this Direction

Attach the claw as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the claw and guide to install the front seat inner cushion shield LH as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the claw as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the claw and guide to install the front seat inner cushion shield RH as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the claw and install the reclining power seat switch knob.

0,0 0,0 false

Install in this Direction

Attach the claw and install the slide and vertical power seat switch knob.

Connect the connector.

0,0 0,0 false

Install in this Direction

Attach the guide in the installation direction shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the guide and claw in the installation direction shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the claw and install the front seat cushion shield LH.

Connect the connector.

0,0 0,0 false

Install in this Direction

Attach the guide as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the guide and claw as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the claw to install the front seat cushion shield RH as shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the guide and claw in the installation direction shown in the illustration.

0,0 0,0 false

Install in this Direction

Attach the guide in the installation direction shown in the illustration.