RM36D0EC _58 Vehicle Interior _083102 SEAT _0419056 FRONT SEAT ASSEMBLY(for SFTM Made Power Seat) A

SEAT FRONT SEAT ASSEMBLY(for SFTM Made Power Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:: ·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

HINT:: ·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.

PROCEDURE

Hide Display 71868A 1.REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD LH

0.719,2.927 0.719,1.99 true 2.448,2.021 2.448,1.396 2.448,1.396 3.156,1.396 true 2.448,1.729 3.135,1.729 true 2.448,1.906 3.073,1.906 true 0.635,2.938 0.844,3.135 0.208,0.198 10 false *a 2.375,2.042 2.552,2.24 0.177,0.198 10 true *b

*a	Guide A
*b	Guide B
	Remove in this Direction (1)
	Remove in this Direction (2)

Remove the screw.

Pull in the removal direction (1) as shown in the illustration and detach the guide A.

Pull in the removal direction (2) as shown in the illustration, detach the claw and guide B and remove the front seat inner No. 1 cushion shield LH.

Hide Display 71812D 2.REMOVE FRONT SEAT CUSHION SHIELD LH

Remove the 2 screws.

0,0 0,0 false

	Place Hand Here
	Remove in this Direction

Place your hand at the position shown in the illustration and pull in the removal direction to detach the claw and guide.

0,0 0,0 false

	Remove in this Direction
	Protective Tape

Using a thin-bladed screwdriver, detach the claw.

HINT:: Tape the thin-bladed screwdriver tip before use.

Detach the guide as shown in the illustration.

Disconnect the connector and remove the front seat cushion shield LH.

Hide Display 84921K 3.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

0,0 0,0 false

Remove in this Direction

Using moulding remover A, detach the claw and remove the slide and vertical power seat switch knob as shown in the illustration.

Hide Display 84921D 4.REMOVE RECLINING POWER SEAT SWITCH KNOB

0,0 0,0 false

Remove in this Direction

Using moulding remover A, detach the claw and remove the reclining power seat switch knob as shown in the illustration.

Hide Display 84922C 5.REMOVE FRONT POWER SEAT SWITCH LH

Click hereVehicle Interior>SEAT>POWER SEAT SWITCH (for SFTM Made)>REMOVAL202304,202405,_58,_083102,_0420334,RM1000000029RME_02_0013,202405,202409,_58,_083102,_0420334,RM100000002LTTS_02_0013,202409,999999,_58,_083102,_0420334,RM100000002NG32_02_0013,

Hide Display 73240 6.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)

Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY (for SFTM Made Power Seat)>REMOVAL202304,202405,_58,_083103,_0419076,RM1000000029ROZ_02_0004,202405,202409,_58,_083103,_0419076,RM100000002LTWL_02_0004,202409,999999,_58,_083103,_0419076,RM100000002NG5P_02_0004,

Hide Display 73230 7.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY (for SFTM Made Power Seat)>REMOVAL202304,202405,_58,_083103,_0419076,RM1000000029ROZ_02_0040,202405,202409,_58,_083103,_0419076,RM100000002LTWL_02_0040,202409,999999,_58,_083103,_0419076,RM100000002NG5P_02_0040,

Hide Display 71862 8.REMOVE FRONT SEAT INNER CUSHION SHIELD LH

0,0 0,0 false

Remove in this Direction

Remove the 2 screws.

Detach the claw and remove the front seat inner cushion shield LH as shown in the illustration.

HINT:: Remove the reclining adjuster inside cover RH together with the front seat inner cushion shield LH.

Hide Display 71875F 9.REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER RH

Detach the claw and remove the LH seat reclining adjuster inside cover RH from the front seat inner cushion shield LH.

Hide Display 10.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Detach the band.

1.354,2.365 1.604,2.573 0.25,0.208 12 true *A 1.281,2.635 1.531,2.844 0.25,0.208 12 true *A

*A	w/ Seat Heater System

Disconnect the connector and detach the claw and clamp.

w/ Seat Heater System:

Disconnect the connector and detach the clamp.

Detach the hook.

Remove the 4 bolts.

Detach the guide and remove the separate type front seatback assembly.

HINT:: Remove the reclining adjuster inside cover LH together with the separate type front seatback assembly.

Hide Display 71876G 11.REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER LH

Detach the guide and remove the LH seat reclining adjuster inside cover LH from the separate type front seatback assembly.

Hide Display 12.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

Open the 2 fasteners.

Detach the hook.

Pass the wire harness through the hole on the separate type front seatback cover.

Insert a thin-bladed screwdriver through the hole on the frame and detach the claw.

HINT:: Tape the thin-bladed screwdriver tip before use.

0,0 0,0 false

Remove in this Direction

Protective Tape

Detach the guide and remove the 2 front seat headrest supports as shown in the illustration.

Remove the separate type front seatback cover with pad.

Hide Display 71074S 13.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

0,0 0,0 false

Fastening Tape

Detach the fastening tape.

Remove the 16 hog rings.

NOTICE:: Be careful not to dirty or damage the separate type front seatback cover.

Hide Display 87510N 14.REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)

Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER (for SFTM Made Power Seat)>REMOVAL202304,202405,_58,_083102,_0419065,RM1000000029RNV_02_0025,202405,202409,_58,_083102,_0419065,RM100000002LTUL_02_0025,202409,999999,_58,_083102,_0419065,RM100000002NG37_02_0025,

Hide Display 73920A 15.REMOVE FRONT SEAT AIRBAG ASSEMBLY LH

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT SEAT SIDE AIRBAG ASSEMBLY (for SFTM Made Power Seat)>REMOVAL202304,202405,_58,_083100,_0419216,RM1000000029RSE_08_0009,202405,202409,_58,_083100,_0419216,RM100000002LW82_08_0009,202409,999999,_58,_083100,_0419216,RM100000002NG0J_08_0009,

Hide Display 8219B 16.REMOVE FRONT NO. 2 SEAT WIRE LH

Disconnect the each connectors, detach each clamp and remove the front No. 2 seat wire LH.

Hide Display 72760D 17.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)

Detach the hook and remove the lumbar support adjuster assembly LH.

Hide Display 18.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

w/ Seat Heater System:

Disconnect the connector and detach the clamp.

Detach the hook and remove the separate type front seat cushion cover with pad.

for Front Passenger Side:

Detach the claw and remove the connector of the occupant detection sensor.

Hide Display 71072S 19.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

Remove the 14 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

NOTICE:: Be careful not to dirty or damage the separate type front seat cushion cover.

Hide Display 87510L 20.REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)

Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER (for SFTM Made Power Seat)>REMOVAL202304,202405,_58,_083102,_0419069,RM1000000029RO8_02_0033,202405,202409,_58,_083102,_0419069,RM100000002LTUV_02_0033,202409,999999,_58,_083102,_0419069,RM100000002NG3B_02_0033,

Hide Display 82192 21.REMOVE FRONT SEAT WIRE LH

Disconnect each connector, detach each clamp, claw and remove the front seat wire LH.

Hide Display 71052A 22.REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY LH

0,0 0,0 false

	Remove in this Direction (1)
	Remove in this Direction (2)

Pull in the removal direction (1) shown in the illustration and detach the hook on the rear side of the front seat cushion spring sub-assembly LH.

Pull in the removal direction (2) shown in the illustration, detach the hook on the front side and remove the front seat cushion spring sub-assembly LH.

Hide Display 71703E 23.REMOVE FRONT SEAT CUSHION PANEL SUB-ASSEMBLY LH

Remove the 4 bolts and front seat cushion panel sub-assembly LH.

Hide Display 24.REMOVE SEAT TRACK COVER

0,0 0,0 false

	Remove in this Direction
	Protective Tape

Using a thin-bladed screwdriver, detach the claw and remove the seat track cover as shown in the illustration.

HINT:: ·

Tape the thin-bladed screwdriver tip before use.

·

Use the same procedure for all seat track covers.

Hide Display 71874C 25.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

0,0 0,0 false

Protective Tape

Detach the hook.

Remove the screw.

Using a thin-bladed screwdriver, detach the claw and remove the front seat lower cushion shield LH.

HINT:: Tape the thin-bladed screwdriver tip before use.

Hide Display 71873A 26.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)

1.792,0.469 2.573,0.167 true 0.542,2.917 0.656,2.156 true 1.76,3.01 2.635,2.698 true 2.604,0.031 2.917,0.188 0.313,0.156 10 false *a 0.448,2.948 0.76,3.104 0.313,0.156 10 false *b 1.552,2.948 1.74,3.146 0.188,0.198 10 false *b

*a	Hook
*b	Guide

Detach the hook.

Remove the 2 screws.

Detach the guide and remove the front seat lower cushion shield RH.