RM36D0EC
_57
Power Source / Network
_087045
M20C-FKS BATTERY / CHARGING
_0418151
GENERATOR
A
M20C-FKS BATTERY / CHARGING GENERATOR INSTALLATION
PROCEDURE
27020
1.INSTALL GENERATOR ASSEMBLY
a.
Install the generator assembly with the bolt and 2 nuts.
- Torque:
- 25 N*m (255 kgf*cm, 18 ft.*lbf)
b.
Install the wire harness clamp bracket to the generator assembly with the bolt.
- Torque:
- 10 N*m (102 kgf*cm, 7 ft.*lbf)
c.
Connect the wire harness to the terminal B with the nut.
- Torque:
- 9.8 N*m (100 kgf*cm, 87 in.*lbf)
d.
Close the terminal cap.
e.
Connect the generator assembly connector.
16361A
2.INSTALL V-RIBBED BELT
17751
3.INSTALL NO. 1 INLET AIR CLEANER
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.